|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-23-2012, 03:08 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2007
Posts: 38
|
1996 ezgo pds
I am working on a 1996 EZGO PDS (Has a Curtis Controller) Cart that will not run. Battery pack is good. Solonoid does not click. Replaced the solonoid and nothing. Does anyone know what I can ck..micro switches, controller... etc..etc..
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-23-2012, 03:12 PM
|
#2 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Texas
Posts: 28
|
Re: 1996 ezgo pds
|
|
|
|
|
12-23-2012, 03:40 PM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,712
|
Re: 1996 ezgo pds
PDS first appeared in 2000. Recheck the year or the drive system type. (see chart attached) Once you ID the drive system we can help you T-shoot the system.
|
|
|
|
|
12-24-2012, 10:11 AM
|
#4 |
|
Not Yet Wild
Join Date: Nov 2007
Posts: 38
|
Re: 1996 ezgo pds
Scotty, Its a series Cart. The controller looks like 1 off of a "Marathon" No Run/Tow Switch or a 6 pinn connector. I was thinking it might be the ITS, doesnt that activate the solonoid when you press the accelorator.
|
|
|
|
|
12-24-2012, 10:36 AM
|
#5 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 ezgo pds
Here is the schematic for a series cart with the solenoid activation circuit highlighted.
The first place I'd check is for B+ (Battery pack voltage) on the small white wire coming out of the back of the cart's charge receptacle. BTW, there is a microswitch in the pedal box that is part of the solenoid activation circuit, but all the ITS itself does is tell the controller how many amps to pass to the motor. |
|
|
|
|
12-24-2012, 11:21 AM
|
#6 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,712
|
Re: 1996 ezgo pds
Quote:
Can you post pics of what you have in the cart? |
|
|
|
|
|
12-24-2012, 11:59 AM
|
#7 |
|
Not Yet Wild
Join Date: Nov 2007
Posts: 38
|
Re: 1996 ezgo pds
Scotty,
Here are 4 pictures Should it have a Pot Box instead of ITS. I have a Marathon and it looks like a Marathon controller. It does not have a POT Box. The Solonoid is mounted behind controller (towards bac of cart) |
|
|
|
|
12-24-2012, 12:27 PM
|
#8 |
|
Not Yet Wild
Join Date: Nov 2007
Posts: 38
|
Re: 1996 ezgo pds
JohnnieB,
How Much Voltage should be coming out of the White wire coming out to the Charger Receptable. It goes to the a Micro Switch on the F/R Switch. |
|
|
|
|
12-24-2012, 12:32 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,712
|
Re: 1996 ezgo pds
Plug your meter into the small black and white wires at controller and tell what the voltage signal is when you move the peddle down. Then recheck it with the meter set to ohms.
This is the second cart I have seen in GA with the old control in the newer cart. Does this cart run? |
|
|
|
|
12-24-2012, 12:42 PM
|
#10 |
|
Not Yet Wild
Join Date: Nov 2007
Posts: 38
|
Re: 1996 ezgo pds
Scotty,
No it does not run. One day (a month ago) he went to take it for a ride and it would not go. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1996 Gas EZGO.....won't go! | Gas EZGO | |||
| Ezgo Charger conversion Post 1996 to Pre 1996 | Electric EZGO | |||
| 1996 ezgo txt | Gas EZGO | |||
| 1996 EZGO, I'm done...(for now!) | Electric EZGO | |||
| 1996 Ezgo | Electric EZGO | |||
Linear Mode
