|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-08-2015, 10:30 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2014
Posts: 25
|
Camber way off after 6" lift kit limo g20 help!
[IMG][IMG]
 [/IMG][/IMG]Ok so I am trying to build a budget limo for the family just put on a 6" lift kit and used the tires off my ezgo cart. Lift looks great it is a rhox lift kit but in order to have it level I had to put the front shock at the highest point and the camber is way off is there any way to correct this? The only way I see is to cut and reweld the lift kit but that's just not right. It should be good to go out of the box.[IMG] [/IMG] |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-09-2015, 07:46 AM
|
#2 |
|
Getting Wild
 Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: Camber way off after 6" lift kit limo g20 help!
Move the bottom of your shock to the hole closest to the spindle
|
|
|
|
|
03-09-2015, 08:35 AM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2014
Posts: 25
|
Re: Camber way off after 6" lift kit limo g20 help!
Tried that then I have a 4 inch lift in the front and the rear is non adjustable still at 6" looks silly as hell lol. It was advertised as a 6" I would think it should ride at 6" with no problems. Starting to think I'm going to cut and Reweld the front lift
|
|
|
|
|
03-09-2015, 10:48 AM
|
#4 |
|
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: Camber way off after 6" lift kit limo g20 help!
2nd hole from the top. I think the back is always a little higher...This is the Jakes.
 |
|
|
|
|
03-09-2015, 11:26 PM
|
#5 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Camber way off after 6" lift kit limo g20 help!
Jake's
 |
|
|
|
|
03-11-2015, 08:18 PM
|
#6 |
|
Getting Wild
Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: Camber way off after 6" lift kit limo g20 help!
All carts are different welds are not consistent from the factory so the same hole trick does not always work.
|
|
|
|
|
06-23-2017, 03:33 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2013
Posts: 1
|
Re: Camber way off after 6" lift kit limo g20 help!
Did you ever find a solution to this? I just installed the Jakes 6" lift on the same limo cart g20 and it's doing the same thing. I dropped the shock to the next hole down and was wondering if it has something to do with the front Knuckle spindles.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Big lift, big camber | Lifted Golf Carts | |||
| RHOX 6" spendal lift camber problems | Lifted Golf Carts | |||
| Feeler: 1999 G16 Limo with 7" lift, 22" mud tires, and performance mods | Golf Carts and Parts | |||
| Jakes 6" lift now camber off | Electric Yamaha | |||
| limo stock tire height " clutch and gears?" | Gas EZGO | |||
Linear Mode
