|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-20-2017, 06:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2017
Posts: 4
|
Clutch
I have a 1997 g16a I changed the main clutch ,I'm getting a noise from secondary clutch I think I found the problem.I was reading that the snap ring on shaft falls out and spring cup rides up against differential case how do I check if that's the problem before I pull clutch off?
Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-20-2017, 07:25 PM
|
#2 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: Clutch
The spring seat should look like this. The silver thing between the spring seat and the case is the spacer that replaces the clip.
|
|
|
|
|
06-20-2017, 08:15 PM
|
#3 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 53
|
Re: Clutch
Look behind the secondary. Does it appear to be rubbing the housing?
Sent from my VS880PP using Tapatalk |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
| Club car performance clutch and driven clutch | Golf Carts and Parts | |||
| Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
| stock ezgo clutch and yamaha clutch | Big Block Talk! | |||
Linear Mode
