11-19-2012, 07:15 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
Another Snubber question
Please forgive me, I've read the snubber posts on the forum but have a need to ask my question a little differently. I have a 1994 Gas Club Car with a dry rotted snubber. The tang that sticks out from the motor platform/frame is welded on not bolted and the clearance just isn't there to squeeze the sucker in between the cart frame and the motor frame tang. So I've taken the rear leaf spring bolts out with a fair amount of effort and am stuck on the front ones.
First question: Do I have to take the shocks loose to get the axle/leafspring combo to drop? Second question: Should I undo the shackles that mount the axle to the leaf springs or not? Is it absolutely necessary to remove the front leaf spring bolts to get enough clearance to get that sucker on? Oops that was the third question |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2012, 11:20 PM | #2 |
Gone Wild
Join Date: Apr 2010
Posts: 172
|
Re: Another Snubber question
prob to get that in there your gonna have to drop everything to move the engine and everything back.... to squeeze that in there... i have a 96 i got lucky my bracket on boittom got broken off so i just pulled it down slid snubber on then pushed up and bolted a new mount on.....
|
11-19-2012, 11:30 PM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Another Snubber question
|
02-03-2021, 02:46 PM | #4 |
Not Yet Wild
Join Date: Jan 2021
Posts: 1
|
Re: Another Snubber question
take the front spring bolts out. The shackles will rotate enough to let you pull the cradle back enough to get the snubber on
|
02-04-2021, 08:57 AM | #5 |
Not Yet Wild
Join Date: Dec 2020
Posts: 6
|
Re: Another Snubber question
I did mine with out removing anything. I used some silicone spray to wiggle that sucker in there. It’s tight and a pain. But u can do it.
|
02-04-2021, 07:02 PM | #6 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: Another Snubber question
|
02-10-2021, 11:00 AM | #7 |
Gone Wild
Join Date: Jun 2016
Posts: 647
|
Re: Another Snubber question
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Snubber Mod | Gas Club Car | |||
how to replace snubber? | Gas Club Car | |||
Snubber Mount | Lifted Golf Carts | |||
snubber | Gas Club Car | |||
Need A Snubber ..... anybody got one ? | Gas Club Car |