Ezgo with alltrax controller problems

[Jrdutton32]

I Think you guys led me to the problem! The micro switch is trashed,who ever worked on it before left the throttle switch box cover off and made a mess of things inside. But I did make a jumper wire to test it and works fine, so just gotta get a micro switch to fix it.

[Jrdutton32]

Microswitch

[scottyb]

[cgtech]

Im gonna go out on a limb and conclude that the microswitch is the problem.....

[Jrdutton32]

Believe it it not, I cleaned the contacts in it and it works tool I get a replacement.

[CART-ZILLA]

hey i dont know if you know but that micro-switch is toast j/k i hope you get it fixed brother!

[Jrdutton32]

Old thread with a new problem, same issues as before but it's not the micro switch this time. Cart will not move I rechecked everything on this thread thinking maybe the micro switch again but it checks out. Got 36.9 at the controller with solid green light. Press the pedal all the way down the light turns red. Also my controller lights stay on even with the key switch in the off position, but will turn off by the run/ tow switch under the seat. Flip it back to run light comes on at the controller. So I need some expertise on this problem. Thanks in advance!

[JohnnieB]

Originally Posted by Jrdutton32

Old thread with a new problem, same issues as before but it's not the micro switch this time. Cart will not move I rechecked everything on this thread thinking maybe the micro switch again but it checks out. Got 36.9 at the controller with solid green light. Press the pedal all the way down the light turns red. Also my controller lights stay on even with the key switch in the off position, but will turn off by the run/ tow switch under the seat. Flip it back to run light comes on at the controller. So I need some expertise on this problem. Thanks in advance!

Three issues here.
1. Cart not moving
2. Controller on with Keyswitch off
3. LED turning Red when pedal is pushed all the way down.

1. Does solenoid click when pedal is pushed?
If so, what is the voltage between the controller's B- and M- terminals when pedal is pushed just far enough to make solenoid click?

2. What is the voltage on Pin-6 of the 10-pin connector on top of the DCX when keyswitch is off?

3. Does it turn RED or does it turn AMBER?

[Jrdutton32]

1. Solenoid clicks as soon as I toggle the switch from neutral to forward or reverse. 27 volts across B- and M- with the pedal in any position.
2. 0 volts with the key on or off.
3.Looks red to me

[Jrdutton32]

Correction: on pin #6 I'm getting 0 volts with the switch off and 35 volts as soon as I toggle the forward switch out of neutral, don't ask me why I'm getting these readings now...
Now the led is staying green no matter where the pedal is.