lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-10-2018, 05:23 PM   #11
ONEFORUGA
Not Yet Wild
 
Join Date: Feb 2018
Posts: 7
Default Re: 2005 ezgo selonoid engages with key

I notice that the controller LED light comes on when tow switch is in run position with key off.
ONEFORUGA is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-10-2018, 06:32 PM   #12
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 2005 ezgo selonoid engages with key

LED shouldn't come on until B+ is applied to DCX Pin-6, which is the keyswitch input.

Check for voltage on Pin-6 on top of DCX when key is off. You have to lift the 10 pin plug a little to get to the pins.

Has the PDS to DCX adapter gotten wet or is it corroded?
JohnnieB is offline   Reply With Quote
Old 02-10-2018, 08:26 PM   #13
ONEFORUGA
Not Yet Wild
 
Join Date: Feb 2018
Posts: 7
Default Re: 2005 ezgo selonoid engages with key

Quote:
Originally Posted by JohnnieB View Post
LED shouldn't come on until B+ is applied to DCX Pin-6, which is the keyswitch input.



Check for voltage on Pin-6 on top of DCX when key is off. You have to lift the 10 pin plug a little to get to the pins.



Has the PDS to DCX adapter gotten wet or is it corroded?


I’m not aware of it getting wet. However, there is no cover aver the controller.


Sent from my iPad using Tapatalk
ONEFORUGA is offline   Reply With Quote
Old 02-11-2018, 11:10 AM   #14
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 2005 ezgo selonoid engages with key

The DCX controller isn't designed to be covered. Unfortunately the same cannot be said about the adapter that is used to interface the PDS cart's wiring harness the the DCX controller.

However, the LED coming on before it is supposed to and the solenoid activating before it should are only symptoms while the problem is that the cart won't run and, in and of themselves, neither of those symptoms will prevent the cart from running.

Connect your DVM between the B- and M- terminals on top of the DCX.
When the solenoid is energized and the pedal is up, you ought to get full battery pack voltage (38.2V if fully charged).
Slowly press pedal to floor and the voltage should gradually decrease to 0V.
JohnnieB is offline   Reply With Quote
Reply

Tags
2005 ezgo
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
99 EZGO has to rev before clutch engages Gas EZGO
Extra Selonoid Extreme DC!
selonoid Electric EZGO
Selonoid problems on 84 CC Electric Club Car
right selonoid Electric Club Car


All times are GMT -5. The time now is 09:38 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.