Speed Controller Replacment Difference From Original

[scottyb]

FYI - Here are 10 reasons to spend a bit more and get the Alltrax controller

http://www.cartsunlimited.net/about-...ntrollers.html

[cgtech]

Well, before we go jumping, this is a series cart, not sepex, right? That controller might be a "proper" knock-off, and you might be able to set the proper throttle type if you had access to a programmer and the info of what throttle type to set it to (key here). Those cheap "Curtis" controllers are a decent copy as far as I have seen (will continue to function even with some mosfets blown). I don't use them, because they suck in general, but, the "copy job" was a half-assed try at a copy. Seems like you might have a version set up for ITS, but you need 0-5k throttle. The throttle type may already exist in there just needing you to set it with the programmer.

[JohnnieB]

If you do decide to return the Curtis knockoff controller and go with an Alltrax controller, you want a SR rather than a XCT.

http://www.cartsunlimited.net/alltrax-sr-series--.html

[reddirt41]

Well I requested a return from the ebay seller so I will let you know how that turns out. If the return is accepted I will be buying an Alltrax from you Scotty which would be my first choice. If I am stuck with this controller I'll be looking for someone to check the programing of it. I called the local cart stores around with no success. Meanwhile I put the old controller back on and will deal with the weak take off until the answer to my return request comes. Thanks everyone for your help.