|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-16-2018, 09:06 PM | #11 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Re: Shorted my EZGO and now it won’t move
It’s sepex
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2018, 09:09 PM | #12 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Shorted my EZGO and now it won’t move
The controller googled as a pds. I’d give steps if I was capable, but I’m not. However, i did find this on the google machine. It looks like it has what you need.
http://www.buggiesgonewild.com/elect...eshooting.html |
05-16-2018, 09:11 PM | #13 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Re: Shorted my EZGO and now it won’t move
By the pics I uploaded and the Pic you referred me to it’s a sepex
Sent from my iPhone using Tapatalk |
05-16-2018, 09:12 PM | #14 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Re: Shorted my EZGO and now it won’t move
The solenoid isn’t engaging with the pedal and it looks to have no power at the switch
Sent from my iPhone using Tapatalk |
05-16-2018, 09:17 PM | #15 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Shorted my EZGO and now it won’t move
Pds is a sepex.
See post #3 in the post I linked. It gives the path of the solenoid activation circuit. |
05-16-2018, 09:39 PM | #16 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Re: Shorted my EZGO and now it won’t move
Yea, but there’s no power coming from the controller pin 9 to the switch. That’s why I’m thinking it’s the controller
Sent from my iPhone using Tapatalk |
05-16-2018, 09:44 PM | #17 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Re: Shorted my EZGO and now it won’t move
Pin 8. Sorry. 9 comes from the switch
Sent from my iPhone using Tapatalk |
05-16-2018, 11:04 PM | #18 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Shorted my EZGO and now it won’t move
You have 36v at pin 4?
|
05-17-2018, 05:37 PM | #19 |
Not Yet Wild
Join Date: Feb 2018
Posts: 13
|
Shorted my EZGO and now it won’t move
No power on pin 4 on the 10 pin terminal connector. Couple volts on 5 and 10 but it disappears quickly. No power on any of the terminals other than a volt or so on a couple. White/yellow has 31 volts going to the run/tow switch. A1 has 36, B- has 0, B+ has 36, left big terminal on solenoid has 38(same as battery pack), left side solenoid has 36, right side small terminal on solenoid has .197, left side has .197, key has .197 on both terminals. It’s on with it in forward, orange grey green at the FNR switch has nothing, backup beeper red has 38 backup beeper green/black has 0. That’s my lead on the negative of the battery and checking the wire. Should’ve proofed it. This is edited
Sent from my iPhone using Tapatalk |
05-18-2018, 12:24 AM | #20 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Shorted my EZGO and now it won’t move
It kinda sounds like you’re jumping around a bit. The 36v follows a specific path as described in that post. I’m a total novice, but I’d start at the white wire on the pack and work forward from there.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
08 RXV shorted 5v system | Electric EZGO | |||
48v carry all 2 shorted out | Electric Club Car | |||
HDK M- Shorted | Electric golf carts | |||
something shorted out | Electric EZGO | |||
motor shorted? | Electric EZGO |