|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-17-2018, 05:03 PM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Pre charge resister
Ezgo 48v Sniper cart, new batts, cables. Cart recently getting jerky, then a no go with one green and 6 red flashes. Noticed there was a resister from solenoid to the bolt that holds controller on cart, the solid wire was burnt/corroded in half, I reconnected it with new terminals and such, when I turned key on and hit pedal the heat shrink started smoking. Not sure why there is a resister there? Also changed ITS, the box had oil in it so figured I’d give that a shot. It moved in reverse for a short time then the 1 green and 6red’s again. 500a spm. Also installed resister and diode on solenoid. The cart has never had any. And has been trouble free other than basics.. solenoid, Batt’s, brakes, new cables. Possible the controller finally gave it up after all those yrs w/o the diode and resister? Any help is appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-17-2018, 05:08 PM | #2 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Also, I get 4 green, then a solid green with light pedal, once I press pedal past a certain mark, it’s the 1g and 6red. Diode is installed red to red and black to black on solenoid.
|
05-17-2018, 05:32 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Pre charge resister
What controller is in the cart?
You may be describing a filter capacitor to the ground.... without it you could just be experiencing throttle signal interference? |
05-18-2018, 12:58 AM | #4 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Spm 500, series cart.
|
05-18-2018, 01:01 AM | #5 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Scotty, how would go about adding another resister?
|
05-18-2018, 07:37 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Pre charge resister
I have some Alltrax capacitor filters, see item #6 here > http://www.cartsunlimited.net/ezgo.html
|
05-18-2018, 02:13 PM | #7 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Before I order I’m more curious about how that works, it was from solenoid to bolt for controller, seems nothing is that simple for me, always the hard expensive way, thx again.
|
05-18-2018, 04:10 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Pre charge resister
It's just for Ezgo, offered for SPM controllers with weird throttle signal interference
|
05-18-2018, 08:16 PM | #9 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Ordered today, thx, hope it’s the issue.
|
05-19-2018, 04:33 AM | #10 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
Re: Pre charge resister
Actually I was confused... that resister went from b- on controller to grd bolt, not solenoid. At any rate, hopefully it will fix her up!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Resister | Electric EZGO | |||
Repost: Resister size/need | Electric EZGO | |||
Pre charge resister | Electric Club Car | |||
Diode and Resister?? | Electric EZGO | |||
hot resister wire | Electric EZGO |