1995 Ezgo 36v non-Medalist

goldstar · 05-28-2018, 11:06 AM

my series motor brushes shorted out I put in new brushes and motor runs fine, but the cart wont run. Did it destroy the controller? the controller is a curtis S/N 4325-P074269L P/N 2586 4G09. It does not have an A1 post. Solenoid clicks but cart won't move. Can I get some help please.

Hedger · 05-28-2018, 02:02 PM

Check the stickies. Good info on trouble shooting

goldstar · 06-05-2018, 06:33 AM

I can't find anything about a 1995 S/N 4325-P074269L on stickies or any where else.

goldstar · 06-07-2018, 07:51 AM

What I meant to say was my controller don't have an A2 post. All diagrams I find has a wire going to an A2 post which I don't have. One diagram has the A B C D posts on the f&r switch going clock wise and another counter clockwise but both has a wire going to an A2 post The A B C D posts seam to be up side down to mine I can't find a diagram without an A2 post on the controller.

kernal · 06-07-2018, 08:08 AM

EZGO stopped using controllers with the A2 post and most replacements don't use it either. On the diagrams, the wire running from the motor to A2 now just goes directly to the F/R switch without stopping at A2 along the way.

When used, the A2 connection enabled "plug braking". Handy for fork lifts but golf carts not so much. Google it if you want to know what it is.

05-28-2018, 11:06 AM	#1
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32	1995 Ezgo 36v non-Medalist my series motor brushes shorted out I put in new brushes and motor runs fine, but the cart wont run. Did it destroy the controller? the controller is a curtis S/N 4325-P074269L P/N 2586 4G09. It does not have an A1 post. Solenoid clicks but cart won't move. Can I get some help please.
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32

05-28-2018, 02:02 PM	#2
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Re: 1995 Ezgo 36v non-Medalist Check the stickies. Good info on trouble shooting
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

06-05-2018, 06:33 AM	#3
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32	Re: 1995 Ezgo 36v non-Medalist I can't find anything about a 1995 S/N 4325-P074269L on stickies or any where else.
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32

06-07-2018, 07:51 AM	#4
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32	Re: 1995 Ezgo 36v non-Medalist What I meant to say was my controller don't have an A2 post. All diagrams I find has a wire going to an A2 post which I don't have. One diagram has the A B C D posts on the f&r switch going clock wise and another counter clockwise but both has a wire going to an A2 post The A B C D posts seam to be up side down to mine I can't find a diagram without an A2 post on the controller.
goldstar Not Yet Wild Join Date: Dec 2015 Posts: 32

06-07-2018, 08:08 AM	#5
kernal Gone Wild Join Date: Jul 2010 Location: Peachtree City, Ga. Posts: 2,759	Re: 1995 Ezgo 36v non-Medalist EZGO stopped using controllers with the A2 post and most replacements don't use it either. On the diagrams, the wire running from the motor to A2 now just goes directly to the F/R switch without stopping at A2 along the way. When used, the A2 connection enabled "plug braking". Handy for fork lifts but golf carts not so much. Google it if you want to know what it is.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
1995 Ezgo 36v non-Medalist	Electric EZGO
1995 ezgo medalist won't go	Gas EZGO
1995 EZGO Medalist	Electric EZGO
1995 EZGO Medalist	Electric EZGO
what oil to use in Ezgo 1995 medalist?	Gas EZGO