|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2018, 03:12 PM | #1 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
2 components on one 12v redeucer
I installed a 48 to 12v voltage reducer to run a speaker. I want to install an indicator light (12v). Can I run both of them off the 12v reducer?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2018, 03:19 PM | #2 |
Gone Wild
Join Date: Sep 2013
Location: Spartanburg, SC
Posts: 291
|
Re: 2 components on one 12v redeucer
Yes, I've got stereo and three sets of lights on mine.
|
06-04-2018, 03:28 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 2 components on one 12v redeucer
Depending on the quality and amperage of the reducer. Normally, it would be fine, but the reducers for less than $20 are sometimes bad.
Club Car DS driver’s club #59 |
06-04-2018, 06:43 PM | #4 |
Not Yet Wild
Join Date: Nov 2017
Posts: 5
|
Re: 2 components on one 12v redeucer
|
06-04-2018, 06:44 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 2 components on one 12v redeucer
Use a little fuse panel and ground bus bar for the best results.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Testing components | Electric Club Car | |||
here are the components on my cart | Electric EZGO | |||
Hooked up new components and got 4th of July | Electric EZGO | |||
Seat belt components | Design Center | |||
Upgrading from 36v to 48v with 36v components | Electric EZGO |