|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-12-2018, 12:23 PM | #11 |
Not Yet Wild
Join Date: Sep 2014
Posts: 25
|
Re: Solenoid Not Clicking
I have verified the micro switch in the pedal is good.
I reconnected my laptop and proceeded to press the pedal. I'm getting a precharge fail on the alltrax program monitor screen which I attached. Does that mean the resistor is bad or not the proper ohms? Thanks, Alan... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2018, 03:08 PM | #12 |
Not Yet Wild
Join Date: Sep 2014
Posts: 25
|
Re: Solenoid Not Clicking
From Alltrax support:
------------------- Hello Alan, That pre-charge resistor is for 36 volts. The 48 volt pre-charge resistor is a 470 Ohm 10 watt. As you can see from the monitor tab photo the controller is only seeing 39 battery volts on the B+ terminal when it should be 48. ---------------------- The correct resistor should be here tomorrow. I'll update my post after installation. Thanks again for everyones help. Alan... |
06-14-2018, 11:17 AM | #13 |
Not Yet Wild
Join Date: Sep 2014
Posts: 25
|
Re: Solenoid Not Clicking
Just a followup to let you know that the correct resistor solved the problem. We now have a working cart!
Thanks, Alan... |
|
|
Similar Threads | ||||
Thread | Forum | |||
Solenoid clicking | Electric Club Car | |||
No clicking from the solenoid | Electric Club Car | |||
Solenoid clicking....no go!!! | Electric Club Car | |||
solenoid clicking | Electric EZGO | |||
HD solenoid clicking | Electric EZGO |