|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-26-2018, 08:12 AM
|
#21 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
Sometimes when the solenoid driver fails you get collateral damage to other parts and circuit board traces as well. In your case, it appears that the damage is limited to the solenoid driver transistor only. As long as the controller passes Step 4 (diode test) and Step 5 (transistor test) of the bench test procedure, you can be sure no other parts are involved.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-26-2018, 08:45 AM
|
#22 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
One other thing, be sure to replace the 250 ohm pre-charge resistor across the large terminals of the solenoid.
|
|
|
|
|
06-26-2018, 10:34 AM
|
#23 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 67
|
Re: 3-1 Error Code. Cart won’t move.
Do I need to replace the resistor with a new controller or just if I fix the broken one and why? I tested the resistor and I got 250 ohms on it.
|
|
|
|
|
06-26-2018, 10:36 AM
|
#24 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
If the resistor tests good then just use the one you have.
|
|
|
|
|
06-26-2018, 11:18 AM
|
#25 | |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 67
|
Re: 3-1 Error Code. Cart won’t move.
Quote:
|
|
|
|
|
|
06-26-2018, 11:20 AM
|
#26 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
Yes, same thing. In step 5 you are testing the solenoid driver transistor.
|
|
|
|
|
06-27-2018, 09:13 PM
|
#27 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 67
|
Re: 3-1 Error Code. Cart won’t move.
I know there are different types of solder. Should a certain type be used for this repair?
|
|
|
|
|
06-27-2018, 10:23 PM
|
#28 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
You would want to use a 60/40 rosin core solder such as this:
https://www.ebay.com/itm/Kester-44-R...IAAOSwhvFZCrYP |
|
|
|
|
06-27-2018, 11:02 PM
|
#29 |
|
Gone Insane
 Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 3-1 Error Code. Cart won’t move.
60/40 or similar ratio rosin core solder used for electronics and electrical wire soldering, make sure it is NOT a lead-free solder. Most will be lead free (Pb Free)
https://www.amazon.com/Alpha-AT-3160...00030AP48?th=1 |
|
|
|
|
06-28-2018, 06:54 AM
|
#30 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: 3-1 Error Code. Cart won’t move.
In addition to solder, you will need some method of extracting the old solder from the component lead holes in the circuit board. Some people use a "solder sucker" vacuum type device, others use solder wicking copper braid.
https://www.ebay.com/sch/i.html?_fro...+wick&_sacat=0 https://www.ebay.com/sch/i.html?_fro...kw=solder+wick |
|
|
|
|
| Tags |
| 3-1 code, golf cart will not move, solenoid driver fail |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ezgo pds - won't go 1-4 error code | Electric EZGO | |||
| 06 TXT PDS 36v- Alltrax error code question | Electric EZGO | |||
| Alltrax SPM 48500 error code | Electric EZGO | |||
| DPI Error Code | Electric Club Car | |||
| Delta Q Charger Error Code 6 | Electric golf carts | |||
Linear Mode
