06-28-2018, 07:24 AM | #1 |
Not Yet Wild
Join Date: Jun 2018
Location: brandon MB
Posts: 18
|
ITS coil
Can anyone tell me what the resistance of the ITS coil should be on a 2006 ezgo txt 36v, mine is showing open?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2018, 07:41 AM | #2 | |
Gone Wild
Join Date: Jan 2014
Location: South Georgia
Posts: 1,120
|
Re: ITS coil
Quote:
http://www.buggiesgonewild.com/elect...e-testing.html |
|
06-28-2018, 11:19 AM | #3 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ITS coil
Quote:
What the voltages ought to be depends on whether your cart has a series or sepex (PDS) drive. Attached is a schematic for the ITS sensor. |
|
06-28-2018, 06:25 PM | #4 |
Not Yet Wild
Join Date: Jun 2018
Location: brandon MB
Posts: 18
|
Re: ITS coil
The control box has failed as it was giving me the 3-2 beeps when in diagnostic mode even after I put a new solenoid on. What kind of control box should I purchase and where? The stock one is a curtis 1206 mix 300 amp I believe.
|
06-28-2018, 06:49 PM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ITS coil
Check the voltage on J1 Pins 4 & 5. Ought to be same as battery pack voltage (38.2V when fully charged).
|
06-28-2018, 08:37 PM | #6 |
Not Yet Wild
Join Date: Jun 2018
Location: brandon MB
Posts: 18
|
Re: ITS coil
When the keyswitch is on and or while depressing the foot pedal?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
HEI module + new coil= no spark...HEI module + original coil= very weak spark | Gas EZGO | |||
Yamaha jf2 ignitor, coil, pulsar coil for sale | Golf Carts and Parts | |||
Fire to the coil and coil is new | Gas EZGO | |||
exitor coil and coil and head for 1990 C.C. | Golf Carts and Parts | |||
10.4v to coil wires until i hook up coil, then zero | Gas EZGO |