|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-03-2018, 08:50 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Location: Edinboro ( near Erie PA)
Posts: 10
|
Ezgo clicks but doesn't move
Hello thank you in advance for help. I just got a 36v ezgo for free. ( Cousin got tired of messing with it) for starters, I'm trying to figure out year and model, the serial number is 899308. Model is 11095. Tag says ezgo Textron. I was trying to figure out specific model so I can look up a wiring diagram.
The problem with the cart is it clicks ( solenoid) but doesn't move. The batteries were low so they are charging now. I'm going to start by cleaning everything and check connections. Is there anywhere specific that I should start with or focus on. Thanks again |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-03-2018, 09:01 AM | #2 |
Gone Wild
Join Date: May 2012
Location: Texas
Posts: 153
|
Re: Ezgo clicks but doesn't move
Let the cart charge until the charger shuts off and unplug charger. Check the fluid levels to make sure the plates are not exposed and add distilled water if necessary to cover plates by 1/4 inch. Then plug charger back in and let it charge again.
|
07-03-2018, 09:04 AM | #3 |
Gone Wild
Join Date: May 2012
Location: Texas
Posts: 153
|
Re: Ezgo clicks but doesn't move
You have a 1995 cart, check the sticky’s for the thread to tell of you have a sepex or series system.
|
07-03-2018, 09:19 AM | #4 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,892
|
Re: Ezgo clicks but doesn't move
What you have is a:
Make :Medalist Propulsion : Electric 36 V Sub Model : Electric Medalist Year : 1995 |
07-03-2018, 02:33 PM | #5 |
Not Yet Wild
Join Date: Jul 2018
Location: Edinboro ( near Erie PA)
Posts: 10
|
Re: Ezgo clicks but doesn't move
Thank you! I couldn't find charts that matched up with my serial number. I did see the sepex or series thread but I didn't look yet because I wasn't sure what exactly I had.
|
07-03-2018, 02:33 PM | #6 |
Not Yet Wild
Join Date: Jul 2018
Location: Edinboro ( near Erie PA)
Posts: 10
|
Re: Ezgo clicks but doesn't move
I will be doing this tonight.
|
07-03-2018, 02:44 PM | #7 |
Not Yet Wild
Join Date: Jul 2018
Location: Edinboro ( near Erie PA)
Posts: 10
|
Re: Ezgo clicks but doesn't move
After looking at the guide I have a series.
|
07-03-2018, 05:18 PM | #8 |
Not Yet Wild
Join Date: Jul 2018
Location: Edinboro ( near Erie PA)
Posts: 10
|
Re: Ezgo clicks but doesn't move
It ended up being a bad connection on the solenoid. Ow to look ad modifications. Lol
|
07-03-2018, 05:50 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Ezgo clicks but doesn't move
Oh! Poor Cuz
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO solenoid clicks and won't move is it F/R switch? | Electric EZGO | |||
97 or 98 EZGO TXT won't move, solenoid clicks | Electric EZGO | |||
EZGO clicks but no move | Electric EZGO | |||
EZGO just clicks wont move | Electric EZGO | |||
ezgo clicks but will not move | Electric EZGO |