|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-15-2011, 08:21 PM | #1 |
Not Yet Wild
Join Date: Oct 2011
Posts: 1
|
98 dcs rear end grind noise
I have a 98 dcs making noise when i let off the pedal. The noise is quite loud. If you used a screwdriver on bicycle spokes while riding. I jacked it up and it made noise when i pushed the pedal. the motor was jerking a little. I pulled the motor and noticed the input shaft splines were torn up a bit. I was going to order a new input shaft. When I look up the motor coupling to order on, it has a date of 1988-1996. I have a 98 with a electric vehicle power systems motor. any ideas on what coupling i should order? I am going to check the bearing on the back of the motor.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
bearings, input shaft, noise |
|
|
Similar Threads | ||||
Thread | Forum | |||
ezgo dcs grind | Electric EZGO | |||
rear end noise | Gas EZGO | |||
Rear end noise | Electric Club Car | |||
g14 rear end noise? | Gas Yamaha | |||
Rear End Noise | Electric EZGO |