Need to test Curtis controllers with ITS throt.

[cor2man]

I have a Curtis 1206MX-1120 300A controller that I would like to test

Unfortunately it is a custom model for EZ-Go's ITS throttle and Curtis does not have it listed with wiring diagrams on their webside.

Does anyone have information regarding the wiring ( for test purposes) of these units?

[yurtle]

Searching turned up this:

http://www.buggiesgonewild.com/elect...1206-test.html

[JohnnieB]

The 1206MX is a sepex controller used in EZGO 36V PDS carts.
(The 1206 without a two letter suffex, is a series controller and the 1206SX was the predecessor to the 12206MX and was used in EZGO DCS carts)

The MX is basically a fly-by-wire system and you more or less need a PDS cart to test it.

Here is a schematic of it connected in a PDS cart with the solenoid activation circuit highlighted.