|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-04-2014, 06:34 PM | #1 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
DCS goes foward in rev and vis versa
just put a new alltrax controller in my DCS cart and the F&R is backwards, can i just switch the F1 & F2 wires at the controller?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-04-2014, 06:41 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: DCS goes foward in rev and vis versa
Yes
|
08-04-2014, 07:06 PM | #3 |
Gone Wild
Join Date: May 2013
Location: Mississippi
Posts: 301
|
Re: DCS goes foward in rev and vis versa
I think the Alltrax controllers must be backwards! Mine did the same thing, & I know I hooked up the wires according to directions. It was correct with the factory controller, too.
|
08-04-2014, 08:10 PM | #4 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: DCS goes foward in rev and vis versa
I know its backwards. I labeled my wires and the labels are still on and I've looked at it like 10 times to make sure they were on the right post.
|
08-04-2014, 10:39 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: DCS goes foward in rev and vis versa
When you look at the controller installed F1 and F2 go .... black on the left and white on the right.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
no foward or reverse | Gas EZGO | |||
g1 no foward | Gas Yamaha | |||
02 ezgo will not go foward | Electric EZGO | |||
foward reverse | Electric EZGO | |||
no foward or reverse | Electric EZGO |