|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2014, 10:44 AM | #31 |
Getting Wild
Join Date: May 2014
Location: South Carolina
Posts: 104
|
Re: 97 txt dcs problem
Is this the correct way to test motor?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2014, 11:36 AM | #32 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 97 txt dcs problem
Yes, stop all other testing and establish a good power supply.
A bad battery pack can read 36v without a load and drop too low to power the cart under load id one of the 6 are bad. Post your pack results as asked earlier. |
09-26-2014, 11:40 AM | #33 |
Getting Wild
Join Date: May 2014
Location: South Carolina
Posts: 104
|
Re: 97 txt dcs problem
I will as soon as I can.
|
09-26-2014, 02:28 PM | #34 |
Getting Wild
Join Date: May 2014
Location: South Carolina
Posts: 104
|
Re: 97 txt dcs problem
Ok motor is good. I had to check it. I'm charging batteries now to get up to 38 volts.
|
09-26-2014, 04:03 PM | #35 |
Getting Wild
Join Date: May 2014
Location: South Carolina
Posts: 104
|
Re: 97 txt dcs problem
Long story short and not make myself look to stupid, one wire fixed everything. It runs great. Thank everyone for all your help. By the way I have a controller for sale now since I no longer need it.
|
09-26-2014, 04:17 PM | #36 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 97 txt dcs problem
It's always good to know because other people come here and never post. They just search and read threads with similar symptoms to their own problem. Which wire was it?
Post you for sale item in the classified section. |
09-26-2014, 07:31 PM | #37 |
Getting Wild
Join Date: May 2014
Location: South Carolina
Posts: 104
|
Re: 97 txt dcs problem
Understood, a2/ b+ wire from controller goes to the solenoid then out to motor. When I replaced the old wires I ran a wire from a2 b+ off controller to solenoid and forgot to hook up the wire that comes off motor to that same post. It got hidden in all the other wires and I missed it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Found a problem...just not THE problem. | Gas EZGO | |||
2 carts, 1 has problem, 1 has another problem. combine for one cart? | Gas EZGO | |||
G9 problem | Gas Yamaha | |||
96-up par car problem | Gas Columbia ParCar | |||
Good problem bad problem | Big Block Talk! |