lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-17-2016, 01:12 PM   #1
doyleliz@att.net
Not Yet Wild
Yamaha
 
Join Date: Jul 2016
Location: Central Missouri
Posts: 25
Default Swapping ignitors

Was told in another thread I could swap my g2 ignitor for a g9. Anyone have instructions or diagram on how to do it.
doyleliz@att.net is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-17-2016, 06:56 PM   #2
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default Re: Swapping ignitors

You would need the G9 ignitor and wire harness.
smallblock450sl is offline   Reply With Quote
Old 08-18-2016, 05:23 PM   #3
doyleliz@att.net
Not Yet Wild
Yamaha
 
Join Date: Jul 2016
Location: Central Missouri
Posts: 25
Default Re: Swapping ignitors

If I can get a g9 harness is it straight forward swap or do I have a lot of hoops to jump through
doyleliz@att.net is offline   Reply With Quote
Old 08-18-2016, 06:08 PM   #4
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default Re: Swapping ignitors

Pretty straight forward. The only problem would be the G9 uses an automatic voltage regulator (a specific plug on the wire harness that plugs into it) and the G2 uses an adjustable Hatatchi voltage regulator with the 3 wires using eye ends held on with screws. There would be no wire harness lead for the low oil level float on the G9 wire harness. Also, the G2 uses "spade connector's" for the solenoid activating wires where a G9 would use eye ends. Pretty simple. Good luck
smallblock450sl is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
answers to ignitors and reaming king pins Gas Club Car
Swapping Controllers? Electric Club Car
Help! G16 Swapping LT-A700X In It?? Bike & ATV Engine Swaps
86 CC swapping to a clone Clone Engine Swaps
swapping carbs Gas Yamaha


All times are GMT -5. The time now is 09:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.