Need flywheel for kawasaki fe290d

Rifle · 01-08-2018, 09:53 PM

I am having a hard time finding a flywheel for my 93 ds with the fe290d motor. Mine has one broken fin. I thought about trying JB weld to repair but would prefer a new or used one.

BearsFan315 · 01-09-2018, 08:45 AM

make sure you get the correct rotation, CW or CCW
what is the Club Car or Kawasaki Part No ??

Rifle · 01-09-2018, 06:59 PM

I believe the Kawasaki part number is 21194-2254 and the rotation is CW. The entire engine model number is FE290D-DS05. The flywheel is cast iron if that matters.

Rifle · 01-09-2018, 07:34 PM

I guess it depends on which side of the motor you look at. Looking at the flywheel it looks like it rotates CW but the cart is a 93 so it must be CCW looking at the drive clutch?

BearsFan315 · 01-09-2018, 08:49 PM

from other post on here:

1992: Started with the FE290 (290cc) Overhead valve, 4-cycle, gas engine in golf cars. Engine rotation is counterclockwise when viewed from the clutch side of engine

guess it has separate trans & Diff,

then in 1997 Started with the Unitized Powertrain (transmission & differential are combined as one unit) and changed the rotation of the FE290 & FE351 engines. Engine rotation is clockwise when viewed from the clutch side.

lockman1 · 01-09-2018, 10:05 PM

A 1993 should have a counter clockwise rotation (viewed from the drive clutch) if it's the original engine,
the Club Car Part number for the flywheel is 1016495!

BrutalSoldier · 01-09-2018, 11:37 PM

I have the stock engine I pulled out of the 89 CC. If it has the same flywheel you need let me know.

lockman1 · 01-10-2018, 07:15 AM

Your 89 KF82, and his 93 FE290 are two completely different animals!

Really nice thought though!

reson4 · 01-10-2018, 11:18 AM

Don't jb weld, if anything break the opposite fin off to balance the flywheel, okay that's the in a pinch backwoods fix,,,

Sent from my XT1609 using Tapatalk

Rifle · 01-10-2018, 10:30 PM

Quote:

Originally Posted by lockman1

A 1993 should have a counter clockwise rotation (viewed from the drive clutch) if it's the original engine,
the Club Car Part number for the flywheel is 1016495!

I found the flywheel new using the part number but $380.00 is a litlle much. Surely there are some used ones somewhere. I live in AZ and you would think there would be parts all over but these older carts are like ghost.

01-08-2018, 09:53 PM	#1
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6	Need flywheel for kawasaki fe290d I am having a hard time finding a flywheel for my 93 ds with the fe290d motor. Mine has one broken fin. I thought about trying JB weld to repair but would prefer a new or used one.
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6

01-09-2018, 08:45 AM	#2
BearsFan315 Gone Wild Join Date: Dec 2017 Location: Portsmouth, VA Posts: 626	Re: Need flywheel for kawasaki fe290d make sure you get the correct rotation, CW or CCW what is the Club Car or Kawasaki Part No ??

01-09-2018, 06:59 PM	#3
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6	Re: Need flywheel for kawasaki fe290d I believe the Kawasaki part number is 21194-2254 and the rotation is CW. The entire engine model number is FE290D-DS05. The flywheel is cast iron if that matters.
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6

01-09-2018, 07:34 PM	#4
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6	Re: Need flywheel for kawasaki fe290d I guess it depends on which side of the motor you look at. Looking at the flywheel it looks like it rotates CW but the cart is a 93 so it must be CCW looking at the drive clutch?
Rifle Not Yet Wild Join Date: Jan 2018 Posts: 6

01-09-2018, 08:49 PM	#5
BearsFan315 Gone Wild Join Date: Dec 2017 Location: Portsmouth, VA Posts: 626	Re: Need flywheel for kawasaki fe290d from other post on here: 1992: Started with the FE290 (290cc) Overhead valve, 4-cycle, gas engine in golf cars. Engine rotation is counterclockwise when viewed from the clutch side of engine guess it has separate trans & Diff, then in 1997 Started with the Unitized Powertrain (transmission & differential are combined as one unit) and changed the rotation of the FE290 & FE351 engines. Engine rotation is clockwise when viewed from the clutch side.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-09-2018, 10:05 PM	#6
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,923	Re: Need flywheel for kawasaki fe290d A 1993 should have a counter clockwise rotation (viewed from the drive clutch) if it's the original engine, the Club Car Part number for the flywheel is 1016495!

01-09-2018, 11:37 PM	#7
BrutalSoldier Addictive Personality Join Date: Jun 2017 Location: Rio Linda, Ca. Posts: 1,289	Re: Need flywheel for kawasaki fe290d I have the stock engine I pulled out of the 89 CC. If it has the same flywheel you need let me know.

01-10-2018, 07:15 AM	#8
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,923	Re: Need flywheel for kawasaki fe290d Your 89 KF82, and his 93 FE290 are two completely different animals! Really nice thought though!

01-10-2018, 11:18 AM	#9
reson4 Not Yet Wild Join Date: Oct 2017 Posts: 11	Re: Need flywheel for kawasaki fe290d Don't jb weld, if anything break the opposite fin off to balance the flywheel, okay that's the in a pinch backwoods fix,,, Sent from my XT1609 using Tapatalk
reson4 Not Yet Wild Join Date: Oct 2017 Posts: 11

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Kawasaki FE290D - Head Gasket Leak	Gas Club Car
Fe290d	Gas Club Car
Sleeving FE290D	Gas Club Car
Concerned about Kawasaki FE290d-CS17	Gas Club Car
So I have a KAWASAKI FE290D, in my 87 cart.	Gas Club Car