|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-26-2019, 03:03 PM | #1 |
Not Yet Wild
Join Date: Jun 2019
Location: SC
Posts: 4
|
Are there 2 different ITS part numbers?
I have a 96 ezgo 36v with a plum fast motor. Also have the Curtis 1205-117. This controller needs a 1.5 - 2.5 voltage from the ITS. I've read some ITS puts out .5-1.5. The part numbers for both ITS are the same. Any advice?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-26-2019, 03:23 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Are there 2 different ITS part numbers?
An ITS doesn't "put out" anything. Voltage is supplied by the controller. There is a good link for troubleshooting ITS below. I've only heard of one or two going bad.
http://www.buggiesgonewild.com/elect...e-testing.html |
06-26-2019, 04:34 PM | #3 |
Not Yet Wild
Join Date: Jun 2019
Location: SC
Posts: 4
|
Re: Are there 2 different ITS part numbers?
I’ve done the trouble shooting. My ITS has a range of 1.4 to 1.7, and it skips around and you can hear the motor shutting off and starting.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Part numbers | Gas Club Car | |||
Need help with CC part numbers | Electric Club Car | |||
OBC part numbers | Electric Club Car | |||
part numbers?? | Gas Club Car | |||
Part Numbers | Electric EZGO |