Onward alignment

[SV1]

Setting toe. 2021 Onward.Stock, not lifted Searched everywhere and cannot find the information. The set up looks a lot like a Precedent. My 2005 Precedent service manuals shows to loosen the jam nuts, remove the tie rods ends from the frame and turn the tie rod ends to adjust. The couple of videos I have found we’re for Precedents (can’t find anything on an Onward) show to loosen the jam nuts, use locking pliers to turn the tie rods to adjust, much like a DS . Are either of these the proper method for an Onward. Anyone have some tips?

[WalterM6]

Read thru this thread. Especially the post by Tahoedawg. It's the best set of instructions I've seen. https://www.buggiesgonewild.com/showthread.php?t=52371

[HarryT]

I maintain a fleet of 2021 Tempos and numeerous members Precidents and Onwards. They all have the same front suspension and steering parts. They all adjust the same, so if you know how or learn how to do one you can do them all. The lock nut is 11/16" and the squared off tie rod bar is 12 MM. Loosen the jam nut and back it off some, then put the 12MMd on the squared off tie rod shaft and turn up or down to reach the desired amount.
Harry

[SV1]

Great info from both you guys. Thanks much