|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-17-2010, 09:02 AM | #1 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
project G8
does anyone know what type of tool i should use for honing i have one of the big three jaw honing tools but was wondering if i should use a dingle berry type lol
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2010, 09:17 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: project G8
I'm gonna go out on a limb here and say that honing is passe. Machinists leave a cross hatched pattern in the walls for dual purpose. Most importantly the motor oil hangs in grooves and lubricates the rings as needed ..... Are you just reringing an old piston?
|
01-17-2010, 09:21 AM | #3 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: project G8
Most of the automotive spring-loaded with stones are just too big for these smaller bores. There are some brake cylinder hones that will fit. If your's will fit using it with a finer stone should be OK. The flex hones are easy to use and give a good finish, especially if you didn't bore the cylinder. Either way be sure to wash with hot soapy water real good when done, and then clean again with a lint free cloth and WD-40 or some ATF.
|
01-17-2010, 09:22 AM | #4 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: project G8
Hey, one more Scotty!!!
|
01-17-2010, 04:18 PM | #5 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: project G8
ok thanks i just got done maching the head 30 thousands and did some port work excited to get some pics up here
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
my project g2 | Members Rides | |||
My project cc 83 | Lifted Golf Carts | |||
need new project | Electric EZGO | |||
EZ GO Project | Big Block Talk! |