|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-14-2012, 08:47 PM | #1 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
New G1 project
Well I made it back into another G1, found this one with up to date CA plates (which is almost impossible here in CA) but was not running. After some tinkering and advice on my carb got it running good. Now onto the modding, I plan on grafting some sort of long travel front end, fabbing a roll cage, new paint, possible big block with axel swap..... And more
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-14-2012, 08:51 PM | #2 |
Getting Wild
Join Date: Sep 2011
Location: Fairfield Ohio
Posts: 81
|
Re: New G1 project
I would like to see how you do the roll cage. I was wanting to build one for mine. but with the body that rolls back I wasn't sure how to do this.
|
02-14-2012, 09:20 PM | #3 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Rhinos have some brackets on cages that swivel on rear and quick disconnect on front, I was thinkin about going this route. In my other project I bought a cheap stock rhino cage and could see it fitting pretty easily just shrinking it to size, I'm gonna try to find one again cheap if I can and go that route
|
02-15-2012, 11:39 AM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: New G1 project
Nice cart! I'm doing an atv front end on mine as well and ran into some trouble figuring out how to tie the atv front frame section onto the G1.
I also want to do the roll cage. I thought maybe a fixed mounted cage attached under the front cowl on the main frame, then attached in the rear next to the body on the sides behind the seats, tie into the frame from underneath, run a mount out from under the cart in front of the rear wheels. Make the cage wide and tall enough to clear the body as it swings up for servicing. Just a thought. I like the quick disconnect idea also. |
02-21-2012, 02:25 AM | #5 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Got alil paining done, went blue on this one, I have some dark blue marine carpet leftover I'm gonna do the floors in along with probably I diamond plate dash
|
02-21-2012, 06:25 AM | #6 |
Getting Wild
Join Date: Sep 2011
Location: Fairfield Ohio
Posts: 81
|
Re: New G1 project
Looking good.
|
02-21-2012, 12:37 PM | #7 |
Gone Wild
Join Date: Nov 2007
Location: central valley
Posts: 167
|
Found a cage I like and kind of how I was seeing it in my head so im going to try and copy this one, it will still retain the shell being able to open
|
|
|
Similar Threads | ||||
Thread | Forum | |||
new project | Gas EZGO | |||
New project. | On Road Golf Carts! | |||
new project | Members Rides | |||
Next project G1 | Gas Yamaha | |||
Project G-16 | Members Rides |