05-15-2007, 10:02 AM | #11 |
Not Yet Wild
Join Date: May 2007
Posts: 8
|
1991 Club Car
Thank you I will do that
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-18-2007, 02:09 PM | #12 |
Not Yet Wild
Join Date: May 2007
Posts: 8
|
1991 Club Car
I need to put a driven clutch cam repair kit in. Is this going to require a puller ? Also I does it matter which hole I put the spring it has 3 holes ?? Also I have to put steering wheel kit in to stop some wobble but the large plastic bearing does not slide down in the column like it should anyone have ideas. Thanks
|
05-18-2007, 02:30 PM | #13 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
For the clutch, you don't need a puller for the driven. Make sure to note which hole the torsion clip came out of, and put it on the opposite end.
I'm not exactly sure what you're talking about on the steering column though. |
05-18-2007, 03:23 PM | #14 |
Not Yet Wild
Join Date: May 2007
Posts: 8
|
1991 Club Car
Well it almost looks like a cup that is about 3 " long and slides down in the column with the other parts.
|
05-18-2007, 04:00 PM | #15 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Wow, I can't picture what you're talking about. The best thing I can tell you to do is wire brush the inside of the steering column and soak it with WD-40 or something like that and keep trying. Do you have a picture by any chance?
|
11-20-2007, 02:27 AM | #16 |
Not Yet Wild
Join Date: Nov 2007
Posts: 5
|
Re: 1991 CLUB CAR
Carts parts plus doesnt make a v-twin kit for us 91s they say they cant get a hold of any, so they dont know exactally what it takes to do the swap I know I really Need one though, all show no go
|
11-20-2007, 03:53 PM | #17 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: 1991 CLUB CAR
Call them. 1.888.861.2640.
Tom will know exactly. I'm pretty sure someone else on here had a 1991 and he got one made for them. The clutches are a little different but other than that, they are pretty much the same as far as the rear end and everything of that nature. |