|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-10-2012, 03:59 PM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
B&S model ID help
Hello,
New cart owner here... it's a Yamaha with a 16HP Vanguard V Twin, at least that's what it has on the air filter cover. There are no tags or numbers in the normal places. It has black tins and air filter. I need a flywheel/ring gear and I really need the numbers to order. Any help would be appreciated, thanks Don |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2012, 01:14 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: B&S model ID help
Welcome to BGW!
Should have a number stamped on the engine block, just not sure where. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-11-2012, 02:53 PM | #3 | |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Quote:
It's suppose to be on the fan shroud or the valve cover, but nothing there. I called B&S and their support sucks...I'm between a rock and hard spot without the numbers. Maybe I'll sell it buy a Honda, ha |
|
04-12-2012, 09:42 AM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: B&S model ID help
If anyone can help it would be Tom at CPP, give him a call>>http://www.cartpartsplus.com/
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-12-2012, 10:30 AM | #5 |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Thanks
|
04-12-2012, 10:42 PM | #6 |
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
Re: B&S model ID help
If you pull the engine and remove the flywheel I think you will be able to find a part #. I just had mine off to install a timing key and I remember seeing a number on there.
|
04-15-2012, 10:43 AM | #7 |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
|
05-05-2012, 09:27 AM | #8 |
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
Re: B&S model ID help
|
05-05-2012, 04:17 PM | #9 |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Yes I did, I took a chance and bought a flywheel off Ebay for a Model # 303447
1295-E1 code 99020311 and it fit. The guy I bought it from also had the stater & regulator which I also bought, so I ended up spending $78.00 for all of it and it starts and runs great. Thanks for asking. |
05-05-2012, 04:23 PM | #10 |
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
See if I can do this picture
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
What model is better? | Gas Club Car | |||
EZ-GO Which model | Electric EZGO | |||
precedent model vs ds model | Gas Club Car | |||
Is a G8 model the same as a G9? | Gas Yamaha | |||
model no | Electric EZGO |