Using curtis hand held with 07 precedent

[tcapling]

Ive got a curtis 1313-3301 hand held, and can see faults etc on the 2007 precedent I'm working on, but the parameters field just comes up blank.

was hoping to use it to step the cart up in speed from the 10ish mph it does now.

any thoughts or suggestions?

thanks

[Fairtax4me]

Can't help with the scanner, but the slow speed is probably a dead speed sensor. Very common.

[mjroman20]

3301 is only dealer level, you would need a 4401 at the very least to do anything. However even with a 4401 you would only have access to a couple of settings but it would allow you to enter a password for speed code 4 if you order one from Clubcar. Your speed sensor should be fine, typically a bad one leads to about 2~4mph, sounds like your simply operating in mode 1 or 2, I think 3 is around 14mph.

[tcapling]

darn, i know when i use it on my ezgo carts i can change the speed settings.

i believe the speed sensor to be good as the whole roll away beep deal works, and there is no fault showing on the diagnostics.

thanks guys