|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-18-2021, 04:38 PM | #11 |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
@cgtech you've helped me out with clutch questions before and hoping you can help again. For some reason I can just never seem to grasp fully how all the components play together. This new cart has way more bottom end and climbing ability than my G16 had, mind you this has stock tires. I'm happy with the way it is driving now but I notice the primary has a bit of a flat spot on the outer sheave (if that's the right term) but the inner is smooth. The secondary is also nice and smooth. I have a new HD belt to go on but just want to know if you see anything that seems in need of replacement. Sorry, if it's hard to see I can get different pictures.
Sent from my SM-G988W using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-18-2021, 07:54 PM | #12 |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
I tried to exaggerate with red lines where the flat spot is. Is it normal?
Sent from my SM-G988W using Tapatalk |
03-19-2021, 08:30 AM | #13 |
Getting Wild
Join Date: Nov 2020
Location: Baltimore
Posts: 110
|
Re: 2013 G29 Drive Build
If you're referring to the area at the outer edges of the sheave. then I'm pretty sure that's normal.
Just linking this for the picture, but you can see the same spot you're talking about in the product image. https://www.golfcartgarage.com/yamah...y-clutch-2007/ |
03-19-2021, 09:55 AM | #14 | |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
Quote:
The picture you linked to shows that flat ridge on the inner sheave. Mine seems to have a flat spot on the outer sheave (the right side of my picture) but the more I think about it, the more i think it must be normal since it isn't an indentation, it seems like it was manufactured that way, the angle comes up smooth and meets this flat spot and it is only on the outermost sheave and no apparent wear on the inner. I will try and get a straight edge against it for a better picture. Sent from my SM-G988W using Tapatalk |
|
03-19-2021, 12:24 PM | #15 | |
Getting Wild
Join Date: Nov 2020
Location: Baltimore
Posts: 110
|
Re: 2013 G29 Drive Build
Quote:
|
|
03-19-2021, 12:33 PM | #16 |
Getting Wild
Join Date: Nov 2020
Location: Baltimore
Posts: 110
|
Re: 2013 G29 Drive Build
So... I don't think it's normal for your outer sheave to be worn like that. These pictures are from the OEM clutch on a 2009 Drive.
|
03-19-2021, 01:59 PM | #17 | |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
Quote:
Sent from my SM-G988W using Tapatalk |
|
03-20-2021, 12:33 AM | #18 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2013 G29 Drive Build
Your clutches are the best ones available during that time. But, your drive belt is totally roached, its bad. The bare minimum you should buy is the factory Yamaha belt (J55-G6241) or newer part number. Do not buy a cheapo belt elsewhere, save yourself the hassle.
If your ok with a little "tighter/stickier" belt go with a G-boost DBYAJ57H, its kevlar belted, and will likely last for the life of your cart. I used to go through (decent quality) yamaha belts about every 2 years, which is to be expected with big tires & such. (My cart is lifted too). The G-boost one listed above was one of those "why didnt I do this sooner" deals, it's been on there for years & has never shown any signs of giving up. Mr. Don plowman also offers great belts made to the standards the OEM would never "spring for". Id give his stuff an A+ all day as well. The key here is, if you are gonna lift it, get a real "top notch" belt, or your gonna be pissed when the cheapo eats $&#% while your trying to have fun. |
03-20-2021, 10:47 AM | #19 | |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
Quote:
The engine also sounded a little bit like it was making a puffing noise which I immediately thought might be exhaust gasket or head gasket but it could also just sound a bit different from my g16. I took a video to see if someone can tell me if it sounds normal for this cart, although I don't know that the video does a very good job of the sound, you hear it a bit better as the engine stops. It might just simply be the sound of the exhaust puffing. Also noticed the breather tube up to the airbox puffs strongly too. Sorry if this seems dumb, but it just didn't sound like what I'm used to and don't want to start swapping bodies etc until I know the mechanical side is decent. https://www.youtube.com/watch?v=_IwNhwLBnzQ Sent from my SM-G988W using Tapatalk |
|
03-21-2021, 03:12 PM | #20 |
Getting Wild
Join Date: Jul 2013
Posts: 118
|
Re: 2013 G29 Drive Build
A couple of updates:
Put the new belt on and WOW! Was able to do tight donuts on the gravel. This thing really woke up! In trying to find the puffing noise and being worried about head gasket, I compression tested and got 105. Decided I would seafoam it before anything and during that found a good size hole in the bottom of the muffler... There is the puffing noise solved. After the seafoam I hit 120 on compression test. Doing another hot soak right now and will gauge it again. 120 seems low (should be around 150 I think I read) but man it sure seems to run fast and strong otherwise. Hopefully I can get a bit higher compression out of this cleaning and maybe a valve adjustment as I don't really want to get into doing any rebuilding. Sent from my SM-G988W using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
2013 CC Precedent Build FS | Golf Carts and Parts | |||
2013 Yamaha Drive Build Project | Members Rides | |||
2013 YDR G29 Gas Build | Members Rides | |||
2013 New Build | Gas Yamaha | |||
2013 Precedent Build | Electric Club Car |