02-05-2007, 08:36 AM | #11 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Reverse questions answered
1. If you install the hi speed gears it changes forward and reverse gear ratio.
2.You can not swap positions with the original forward and reverse gears. 3. The 3/16 spacer will work, However you would need to have the clutch machined to allow it to shift farther. When you put the spacer in you will lose 3/16 of your shift profile. (The ramps will run out of travel preventing the clutch from opening all the way.) |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2007, 09:18 PM | #12 |
Not Yet Wild
Join Date: Feb 2007
Location: San Antonio, Tx
Posts: 40
|
You have the unitized transaxle just like my 99 cc (it has kawasaki on it btw), putting in the high speed gears is relatively easy depending on your mechanical ability.
|
02-10-2007, 11:38 AM | #13 |
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
hey guys. im not getting the HS gears and im making my own jack shaft, thanks though...
|
02-10-2007, 12:41 PM | #14 | |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Quote:
|
|
02-10-2007, 11:24 PM | #15 |
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
yes i know, i am basing it off the OTHER KIT... i had TCD give my grand pa the dimeniosna and he's having it made
|