03-04-2007, 11:46 PM | #11 |
Gone Wild
Join Date: Jan 2007
Posts: 731
|
it will. None of that "im going to engineer this to use an engine that spins the opposite way just to be a butthole" crap.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2007, 02:49 AM | #12 |
Gone Wild
Join Date: Jan 2007
Posts: 382
|
and where else do they cut corners......other than the plywood seats.....
just to clarify.....(also explained in my avi if youre too retarded too reed) im am for both clubbys and ez's but only clubby IQ's E-Z-GO still has a better engine........ |
03-05-2007, 03:31 PM | #13 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
OK, I'm going to try to get my point across here, but remain neutral in doing so;
Here is the scenario: Ace and I both buy the same engine to put in our carts, he has an E-Z-GO and I have a Club Car. For Ace's E-Z-GO, the engine cylinder must go in the opposite way to get the crank side on the drivers side with the differential input shaft. On my Club Car, the engine bolts in in the exact same orientation the old came out, AND it turns the correct way. I won't lie, the 1997 and up Club Car vehicles have a CW rotating FE290. BUT, if you go to a engine shop and buy an FE290 today, it will still be the correct rotation. Club Car switched the engine rotation, not just to be a "butt hole," but it was required by their new rear ends. |
01-23-2011, 05:25 PM | #14 |
Not Yet Wild
Join Date: Jan 2011
Location: pittsburgh
Posts: 3
|
Re: Golf cart salvage yard
im looking for a golf cart salvage yard does anyone know where any are near pa i need 2 roof one for a yamaha g1 and one for a 86 ez-go or does anyone have one
|
01-23-2011, 06:15 PM | #15 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Golf cart salvage yard
Hey umm Bill this thread is over 3 yrs old. Put an ad in your local CL or search it to see what come up.
|
01-23-2011, 06:52 PM | #16 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Re: Golf cart salvage yard
I dont know there you are from but my dad paid like $1300.00 for a 04 CC DS
|
06-10-2015, 08:54 PM | #17 |
Not Yet Wild
Join Date: Jun 2015
Posts: 2
|
Re: Golf cart salvage yard
I have a 2007 EZGO ST 4+4 utility vehicle and need a passenger side A arm. this part will have to used because EZGO does not make it any longer. I'm told that EZGO does not support the ST 4+4 after 7 years. Makes me want to run out and buy another EZGO products. They should be put out of business.
|
06-13-2015, 12:55 PM | #18 |
Getting Wild
Join Date: May 2015
Location: NE Ohio
Posts: 124
|
Re: Golf cart salvage yard
|