|
10-17-2016, 05:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2016
Posts: 5
|
g cor switch
Is there a way to test a gcor switch. Just want to make sure that is the problem before I order one.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-19-2016, 06:20 AM
|
#2 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: g cor switch
All the Gcor has in it is 2 microswitches, you should be able to test continuity with a meter.
I've read your other thread saying that it won't start after washing it... http://www.buggiesgonewild.com/gas-c...-club-car.html The Gcor is a sealed unit, and unless you flooded the pedal assembly access with water, I find it hard to believe that the Gcor went bad! (it's not a part that has numerous problems like the Mcor has) Hope I'm not too late!  |
|
|
|
|
10-20-2016, 06:52 AM
|
#3 |
|
Not Yet Wild
Join Date: Oct 2016
Posts: 5
|
Re: g cor switch
thanks i'll try that. If that not it I have no idea where to look next. Any thoughts.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Reversing Switch, Directional Key Switch, & Starter Circuits | Gas Columbia ParCar | |||
| forward/reverse switch change to toggle switch | Electric Club Car | |||
| 2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
| Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Linear Mode
