12-30-2010, 02:46 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Posts: 9
|
79 2 stroke EZ Go
I am rebuilding my 2 stroke and have been following the threads. I know how to remove cluthch. Andat the front of the engine I have removed flywheel, and electrical plates with points and condenser. All that is left between getting to the seal to replace it is the electrical armature. How do I get it off. I am afraid if I put a puller on it will damage it. Thanks, Joe B.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-30-2010, 06:36 PM | #2 |
Not Yet Wild
Join Date: Oct 2010
Posts: 20
|
Re: 79 2 stroke EZ Go
I took a rubber mallet and taped on the shaft and it eventually came free. I have a 1979 model 2pg I just re-built and I also have a spare. I had fun but I had to learned everything the hard way.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2 stroke to 4 stroke swap? | Gas EZGO | |||
91 GXT 2 stroke to 4 stroke swap. HELP! | Members Rides | |||
88 ezgo 2 stroke convert to 4 stroke | Gas EZGO | |||
can i use 2 stroke ezgo clutch on 4 stroke | Big Block Talk! | |||
Easy: 4-Stroke vs 2-Stroke | Gas Club Car |