91 ezgo No fire

[Bighits]

I have bought a battery, coil, igniter and checked all connections but did find by wiggiling the one terminal on the connecter side of the ignition key it pops a little , My question could this be the reason i am not getting spark ? Now the motor wont even turn over but i thinks thats from wiggiling the one spade on the ignition ? Help please i am going broke :(

[popatop]

Hi Bighits, I would by pass the ignition switch, that away you would know if it was bad or not, and yes if it is bad you wouldn't get no spark. If you have a test light you could check it that away also. Good Luck

[racin161]

Right popatop you need to connect both wires together with a piece of wire then depress the peddle and listen for the solenoid to click. If it does you have a bad switch.Always check GROUNDS and cable connections first may be your problem.

[Bighits]

Thanks for your reply Gents ! I have a new one on the way and i am just gonna put the new one in and hoping it's the problem and not the pickup inside the motor otherwise i will be walking on the course this year ! Thanks again :)

[popatop]

Let us know how it does

[Bighits]

Sure will :)

[Bighits]

Well I changed the key switch out and it turned over the first time and would not turn over again after depressing the gas pedal but the reverse buzzer works again !