|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-10-2013, 05:57 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2013
Location: South Western Pa
Posts: 3
|
G-22 front clip mounting question
I have a G-22. Just painted the body, noticed a bracket on the front of the chassis, but there is nothing on the front body. Am I missing something, the front of my body just sits on the front bumper, is the correct.
Nick |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-11-2013, 11:58 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: G-22 front clip mounting question
On my G1 there is a piece bolted to the center where the front suspension arms mount. It goes up under the front of the body and it doesn't bolt to it, but just lets the front of the body set against it. It allows the front of the body flex a bit without being too rigid.
Perhaps it's the same with the piece your talking about. |
|
|
|
|
03-12-2013, 10:38 AM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2013
Location: South Western Pa
Posts: 3
|
Re: G-22 front clip mounting question
Thanks Smokindawg
It sounds like the same thing I have, they must all be like that. Nick |
|
|
|
|
03-12-2013, 11:42 AM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2012
Location: SW Michigan
Posts: 61
|
Re: G-22 front clip mounting question
Mine also,,,, but I think I am going to ad a little metal bar to straighten the plastic hood.... It is already bowed up under there.......
|
|
|
|
|
03-12-2013, 06:41 PM
|
#5 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G-22 front clip mounting question
They use a "spring clip" to hold the front cowel to that bracket. Part #ju0-f2567-00-00 Not the best idea Yamaha ever had
 |
|
|
|
|
03-12-2013, 10:54 PM
|
#6 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G-22 front clip mounting question
On the g22 I built, I welded a piece of strap on the frame where the body was suppose to clip. Then I drilled holes in the body and strap, and used bolts to hold it on.
My build starts on page 444 in the "G8 Club" if you care to look. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Front Clip Question | Gas Harley Davidson | |||
| Front Nose Clip | Design Center | |||
| WTB older club car front clip. | Golf Carts and Parts | |||
| Front Clip | Gas Yamaha | |||
| New to me G1, G2 or G16 front clip swap? | Gas Yamaha | |||
Linear Mode
