Brush Guard and Rear Bumper for $150

[Pitbull Joe]

Nice additions. Do you have thread about the speaker enclosure?

[BIGBREW]

I would like a bumper with a receiver for my G 14 I looked on Ebay for him and could not find him, can someone provide a link? Having a hitch on the back of the cart would help me with chores.

[BrewCityMusic]

the speaker enclosure is totally temporary, it's just a simple 1/2" plywood box that the previous owner had on the cart along with a home-made overhead console. I have a small (60w) Alpine amp in the box with some Pioneer 6X9's for now, and I picked up a new ABS enclosure for the stereo but the plan once I get the cart done and painted is to dump the box, mount a bigger amp under the seat somewhere and then I'm going with a set of 8" Wakeboard speakers mounted on the back of the seat supports. Once I get that part of the project going I'll be doing a thread, I'm sure ...

Here's a link to the guards: http://www.ebay.com/itm/321089926546...84.m1439.l2649

[Pitbull Joe]

That would be cool. I was thinking that box would good for like 2 shallow 8" subs, the have the overhead console for some 6.5" speakers or whatever they hold.

[BrewCityMusic]

If I were going to keep the box and speakers up there, I'd lean towards doing a single 8 inside the box with 2 downward-firing ports (keep the water and mud out) and move the 6X9's outward a bit ... The Bazooka Wakeboard speakers I'm using are pretty flat down to 40hz though so hopefully I'll be able to forego a sub altogether (I'm already drawing over 12A with my LED lightbar, so the less juice I can devote to the tunes the better...)

NOW - as to the brushguard, Mark made me a prototype adapter and I was able to get the front guard mounted temporarily, the bracket was just a little off spec so it's going to have to be remade so I can do the permanent mount - once I get the correct spec bracket it's going to look great, the angles all turned out correct and the sides clear my flares, etc so I'm definitely impressed, especially for the price (I've seen many other Yami brushguards and these are by FAR my favorite, the big tubing, etc make it one solid looking setup!)

[gray horse]

Looks good on the cart and appears to be quite a heavy made setup.

[ddeblance]

Mark A. Augustine
Northern Metal Stamping
President
Phone (231) 421-1615
Fax (231) 421-1617


www.northernmetalstamping.tdcart.com

[ddeblance]

Here's an update on the work from Rebel Metal Works. These are parts for Club, but he is supposed to have an Ezgo in his shop now getting measurements.

Upper Brush Guard
Front Basket
Mini Step for Rear Seat
Rear Seats
Cargo Box

[ewbldavis]

I like that...looks great!

[landers96]

Doesn't look like he ever got around to making one for EZGO. Just checked his ebay page.