|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-04-2013, 08:37 PM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
G1 clutch
I got my 81 g1 running great and im haveing a problem with the clutch jurking, i did grease a while ago, should i take it apart and clean it real good, and put some fresh grease? The belt is new on it, thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2013, 08:48 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: G1 clutch
What do you mean its jerking? Describe what is happening...
|
04-04-2013, 08:52 PM | #3 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 clutch
When u give it gas it jerks at low rpms, and its sueaking, when its going fast its ok, its never been this jerky, thanks
|
04-04-2013, 08:55 PM | #4 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 clutch
Don't use grease on the clutch. Use dry lube. Grease will hang on to all the dirt that gets in the clutch. Are you sure the clutch sheaves and belt are clean and don't have any grease on them?
|
04-04-2013, 09:23 PM | #5 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 clutch
I was just going to grease the shaft a little on both clutchs,whats a good dry lube? Thanks
|
04-04-2013, 09:31 PM | #6 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 clutch
Liquid wrench makes a good dry lube. There is also a good dry lube at walmart in the RV section.
|
04-04-2013, 10:18 PM | #7 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: G1 clutch
Yeah, I'd be taking it apart and inspecting it really good. Check for dry spots on the shaft of the primary clutch. Also, if the ramps on the secondary are worn it won't engage properly or shift out smoothly. It sounds like something is binding when it's trying to shift out. Don't go crazy with the lube. Make sure everything is squeeky clean, then use the lube on all metal to metal moving parts only, just a little. You may have a dry bearing in the primary, so you might want to take the primary off the crank and inspect that too.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
Clutch Help - G1 Drive Clutch Spring | Gas Yamaha | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
stock ezgo clutch and yamaha clutch | Big Block Talk! |