|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-06-2013, 04:11 PM | #1 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Rocker arms look dry on my G2
I removed the valve cover on my G2 to check the valve setting and the rocker arms didn't look like they were getting much oil. Any suggestions?
Bob T |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2013, 11:41 AM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Rocker arms look dry on my G2
The valve train get's it oil from the metal tube (comeing up the back of the cylinder), but for it to work, the "one way" check valve (located on the passanger side of the valve cover) must be good. If you take it off, you should be able to blow thru it, but not suck thru it.
|
07-07-2013, 11:51 AM | #3 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Rocker arms look dry on my G2
I checked the valve and it seems ok.
Bob T |
07-07-2013, 11:57 AM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Rocker arms look dry on my G2
|
07-07-2013, 12:30 PM | #5 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Rocker arms look dry on my G2
The engine was apart. I honed the cyl and replaced rings and rod bearing. The oil slinger was on the end of the rod. I have not checked the compression. I will check that metal tube in the back. The other lines are in good condition.
Bob T |
07-07-2013, 02:41 PM | #6 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Rocker arms look dry on my G2
The metal tube is clear. I will check the compression later.
Bob T |
07-07-2013, 05:51 PM | #7 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Rocker arms look dry on my G2
The compression was 150. Lower than what I would have thought.
Bob T |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB ezgo rocker arms | Golf Carts and Parts | |||
32lb valve springs and 1.3 rocker arms video | Clone Engine Swaps | |||
16 Vanguard rocker arms | Big Block Talk! | |||
NEW EZ GO Rocker Arms | Gas EZGO | |||
EZGO Gas-rocker arms upgrade?? | Gas EZGO |