|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-08-2013, 08:42 PM | #1 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
secondary clutch G16 ..spring hole question
I have a G16 and want a little more torque than stock..secondary spring setting stock calls for B/3 on spring.. can I set it to more preload and get a little more torque with out using a aftermarket spring..I read thats not a good idea to install .. to much preload ...so what holes should I use to get more torque than stock anyone have experience doing this..if yes what hole combo should I use
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-08-2013, 10:07 PM | #2 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: secondary clutch G16 ..spring hole question
can anyone help me with this question?????and will removing the plastic washer help with anything ???
|
07-08-2013, 10:15 PM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: secondary clutch G16 ..spring hole question
tons of info on this subject right on this first page. all you gotta do is read.
|
07-08-2013, 10:42 PM | #4 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: secondary clutch G16 ..spring hole question
well I did read some but do not understand ..when changing my clutch spring do I keep it at B and change numbers or do I change the numbers too ..example stock is b/3 should I stay in b then go up to b/4 and so on..or do I change it to c/4 ..thats what I dont understand ??
|
07-08-2013, 10:51 PM | #5 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: secondary clutch G16 ..spring hole question
I'd do the concierge/umax spring. Its cheap and getting very popular lately. Good for stock or a hotrod!!
Keep reading, you will learn tons of modifications!! |
07-08-2013, 11:07 PM | #6 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: secondary clutch G16 ..spring hole question
please send link for a unimax spring to buy please yamaha G16
|
07-08-2013, 11:12 PM | #7 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: secondary clutch G16 ..spring hole question
Cartpartplus, vender on here, or smallblock450sl. Or Yamaha dealer in town.
|
07-09-2013, 10:05 AM | #8 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: secondary clutch G16 ..spring hole question
still wondering if I could get some GOOD advise on my clutch question ..about just getting a little more preload on my clutch stock spring... stock its B/3 will B/4 give me more than stock or do I change it to C/4 ..is the clutch need to stay in B hole for just a bit more than stock..
|
07-09-2013, 01:47 PM | #9 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: secondary clutch G16 ..spring hole question
If you think about it and check the stock position you will see that hole 4 will increase tension.
|
07-09-2013, 06:12 PM | #10 |
Not Yet Wild
Join Date: Jun 2013
Location: Michigan
Posts: 44
|
Re: secondary clutch G16 ..spring hole question
thank you very much ..thats all I needed to help me ..well appreciated
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Driven Clutch Factory Spring hole setup | Gas Yamaha | |||
Secondary clutch spring | Gas Yamaha | |||
Secondary clutch puller - bolt hole spacing | Gas Yamaha | |||
secondary clutch spring | Gas Yamaha | |||
91 g2 secondary clutch spring | Gas Yamaha |