G1 drive belt

[makobuggie]

Hello,i just replaced my second clutch and its plowmans kit, i have 2 plowmans drive belts and i think there 2 tight, when i take off it jerks real bad,i want to buy a little bigger belt,can someone give me a idea were can i buy 1 a little bigger? Plowmans dont have anything else, thanks,

[slonomo]

This is a G1, correct? Mine did the same thing. Those belts are just beefy and they need to get a little worn in. Mine would take off during starting, so the starter was making the clutch engage. Give it some time, it'll loosen up. Don Plowman even told me it would do that. I'd say a couple hours of drive time, and lots of starts and stops and it'll wear in pretty quick.

Don't get a longer belt, you'll lose quite a bit of low end torque.

[makobuggie]

Originally Posted by slonomo

This is a G1, correct? Mine did the same thing. Those belts are just beefy and they need to get a little worn in. Mine would take off during starting, so the starter was making the clutch engage. Give it some time, it'll loosen up. Don Plowman even told me it would do that. I'd say a couple hours of drive time, and lots of starts and stops and it'll wear in pretty quick.

Don't get a longer belt, you'll lose quite a bit of low end torque.

thanks

[yamarancher]

Maybe you could losin up your torque cable, might be to tight !

[makobuggie]

Originally Posted by yamarancher

maybe you could losin up your torque cable, might be to tight !

hello,its a 81 g1 it does not have one, wish it did, thanks