|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2020, 08:20 PM | #11 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Curtis 400 amp harness plug to Alltrax XCT...
Cool beans.. is it on the website?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2020, 10:39 PM | #12 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Curtis 400 amp harness plug to Alltrax XCT...
|
09-19-2020, 08:57 AM | #13 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: Curtis 400 amp harness plug to Alltrax XCT...
There was some misunderstanding and the one he has was for the same setup I referred to with the YDRE that would have to be re-mapped for the PDS2 and then the adapter he is talking about would work. I actually found out yesterday from a large EZGO dealer in the area that they had (2) of the same type carts (Cushman Shuttles) in the shop and that they were having issues with the key switch circuit blowing controllers. They had one were they replaced the control harness and it fixed it and the other they were on the 2nd harness and were hoping that fixed that one. This sounds eerily like what happened in my case where we lost power for no reason and weren't able to get the system to activate unless we jumpered the small post on the solenoid in order to get power to the handheld but could never get anything with the pedal. These sound like a mess and I've learned alot from it but beware if you're thinking about buying one.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Brand New Danaher RXV Conversion Kit to A Curtis Controller Plug and Play | Golf Carts and Parts | |||
1206-03 curtis 6pin plug | Electric EZGO | |||
Need plug to fit harness | Electric Club Car | |||
RXV Mystery Plug in wiring harness | Electric EZGO |