lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-04-2017, 07:05 PM   #1
Romans916
Not Yet Wild
Club Car
 
Join Date: May 2017
Location: North Georgia
Posts: 3
Default Adding Lights

I have a CC Precedent 2014 and I want to add an LED light kit. My cart's configuration is 6 8v batteries. It seems that all the light kits say they fit 4 12v battery configurations. Am I missing something?
Romans916 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-04-2017, 07:15 PM   #2
Kashmir
Gone Wild
Club Car
 
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
Default Re: Adding Lights

You will need to get a 48 volt to 12 volt reducer.
Better that way too because you will not be draining off of just one or two batteries.
You will be pulling from the whole pack.
Site sponsors Carts Unlimited and Revolution Golf Cars both carry good quality reducers.
Don't get any ebay Chinese junk.
Kashmir is offline   Reply With Quote
Old 06-04-2017, 07:54 PM   #3
crash test dummy
Guest
 
Posts: n/a
Default Re: Adding Lights

yes do not get Chinese junk



attached is how to wire reducer
Attached Images
File Type: gif CC 48V.gif (53.6 KB, 0 views)
  Reply With Quote
Old 06-04-2017, 07:58 PM   #4
Romans916
Not Yet Wild
Club Car
 
Join Date: May 2017
Location: North Georgia
Posts: 3
Default Re: Adding Lights

Thanks for the direction. I will check out the sponsors.
Romans916 is offline   Reply With Quote
Old 06-04-2017, 08:01 PM   #5
Romans916
Not Yet Wild
Club Car
 
Join Date: May 2017
Location: North Georgia
Posts: 3
Default Re: Adding Lights

Thank you for the diagram
Romans916 is offline   Reply With Quote
Old 06-04-2017, 08:06 PM   #6
crash test dummy
Guest
 
Posts: n/a
Default Re: Adding Lights



..........
Romans916 ... Welcome to BGW
  Reply With Quote
Old 06-04-2017, 08:17 PM   #7
Down South
Growing In Grace
 
Down South's Avatar
Club Car
 
Join Date: Aug 2011
Location: Retired now and back home in Louisiana
Posts: 6,301
Default Re: Adding Lights

Run the ground wire for the converter to the B- terminal on the controller, not the pack negative. Both will work but the OBC will read the B- terminal on the controller.
Down South is offline   Reply With Quote
Old 06-04-2017, 08:19 PM   #8
crash test dummy
Guest
 
Posts: n/a
Default Re: Adding Lights

Quote:
Originally Posted by Down South View Post
Run the ground wire for the converter to the B- terminal on the controller, not the pack negative. Both will work but the OBC will read the B- terminal on the controller.
yep its in the diagram
  Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Adding brake lights to an E-Z-Go Design Center
Adding Aux Battery for lights ?? Electric Club Car
Adding head lights to 97 DCS Electric EZGO
Adding a 12V Battery for Lights ? Electric EZGO
I'm Adding Serious Lights to a Cart! Design Center


All times are GMT -5. The time now is 01:35 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.