|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-13-2022, 08:54 AM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 42
|
G2 wiring help
Got a G2 with the resistor coil, I know I should replace the coil with the controller but just trying to get the cart going for now without investing much.
Sounds like something is shorting out. I have the wiring diagram and everything looks wired up correctly but cart doesn't really move a lot. Could someone post some pictures of their coil and how it is wired with the pedal glide? Really appreciate all the help I can get. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Gcor wiring harness doesn’t match cart wiring harness | Gas Club Car | |||
Quick 2ga wiring question. What all needs re-wiring? | Electric Club Car | |||
Controller wiring/DCS fnr switch wiring | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO |