Forward / Reverse Switch

[gable74]

Considering changing this switch and relocating it someplace else on the cart. Not a fan of the location on the dash. Can someone chime in with the specs on the stock switch?

- Is it just a simple 2 position rocker with a center common?
- What are the specs on the switch? Amps/volts?
- Are they polarity reversing?
- Any part numbers on the male/female connector used to connect it to the main wiring harness under the cupholder?
- Can someone explain the operation or post a schematic so I can see how they route power to/from?

Wanted to change it out to a simpler rocker switch and relocate for convenience.

Thanks,

[scottyb]

You can use a just a SPDT (single pole double throw) rocker on/off/on config.
CC and Ezgo have them and the housing for below the seat edge mounting.
I find I can reach this location much easier than the dash location.

[gable74]

Originally Posted by scottyb

You can use a just a SPDT (single pole double throw) rocker on/off/on config.
CC and Ezgo have them and the housing for below the seat edge mounting.
I find I can reach this location much easier than the dash location.

Thanks.

I was thinking of even doing something on the center of the steering wheel. Any idea of the connector type/part number?