lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-26-2010, 12:24 PM   #1
giwhop
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
Default Programming alltrax controller

Trying to program dcx500 controller but when i go into pro software message comes up and says cannot locate motor controller.
giwhop is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-26-2010, 12:32 PM   #2
ezgokid
resident idiot
 
ezgokid's Avatar
E-Z-GO
 
Join Date: Apr 2010
Posts: 582
Default Re: Programming alltrax controller

What kind of cart is this controller on? Are you bench programming(out of cart) or programming in-cart? The green LED MUST be illuminated BEFORE opening ControllerPRO.
ezgokid is offline   Reply With Quote
Old 11-26-2010, 12:39 PM   #3
giwhop
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
Default Re: Programming alltrax controller

Quote:
Originally Posted by ezgokid View Post
What kind of cart is this controller on? Are you bench programming(out of cart) or programming in-cart? The green LED MUST be illuminated BEFORE opening ControllerPRO.
Its a pds cart and it is in the cart and the green led is solid.
giwhop is offline   Reply With Quote
Old 11-26-2010, 12:41 PM   #4
ezgokid
resident idiot
 
ezgokid's Avatar
E-Z-GO
 
Join Date: Apr 2010
Posts: 582
Default Re: Programming alltrax controller

Quote:
Originally Posted by giwhop View Post
Its a pds cart and it is in the cart and the green led is solid.
Okay and I assume your computer is plugged in to the controller via a USB-Serial cable?
ezgokid is offline   Reply With Quote
Old 11-26-2010, 12:52 PM   #5
giwhop
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
Default Re: Programming alltrax controller

Quote:
Originally Posted by ezgokid View Post
Okay and I assume your computer is plugged in to the controller via a USB-Serial cable?
Yes it sure is.
giwhop is offline   Reply With Quote
Old 11-26-2010, 01:00 PM   #6
ezgokid
resident idiot
 
ezgokid's Avatar
E-Z-GO
 
Join Date: Apr 2010
Posts: 582
Default Re: Programming alltrax controller

Do you have the latest build of ControllerPRO (build 39)? This is what I did to program my DCX.

1. Plug in controller to computer.
2. Turn key switch to ON position
3. Put direction selector to FWD position.
4. Verify solid green light is ON.
5. Open ControllerPRO
6. Make modifications and so on...

If none of this helps I am sure one of the experts will chime in.
ezgokid is offline   Reply With Quote
Old 11-26-2010, 01:04 PM   #7
giwhop
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2009
Location: Grand Isle Louisiana
Posts: 30
Default Re: Programming alltrax controller

Quote:
Originally Posted by ezgokid View Post
Do you have the latest build of ControllerPRO (build 39)? This is what I did to program my DCX.

1. Plug in controller to computer.
2. Turn key switch to ON position
3. Put direction selector to FWD position.
4. Verify solid green light is ON.
5. Open ControllerPRO
6. Make modifications and so on...

If none of this helps I am sure one of the experts will chime in.
That is the program i downloaded im starting to think it might be the cord hopefully some of the experts will let me know thanks for the help.
giwhop is offline   Reply With Quote
Old 11-26-2010, 01:05 PM   #8
ezgokid
resident idiot
 
ezgokid's Avatar
E-Z-GO
 
Join Date: Apr 2010
Posts: 582
Default Re: Programming alltrax controller

That reminds me, do you have the driver installed for the USB-Serial cable you are using?

No prob.
ezgokid is offline   Reply With Quote
Old 12-06-2010, 03:05 PM   #9
jacksonrh64
Not Yet Wild
 
jacksonrh64's Avatar
 
Join Date: Nov 2009
Location: Bayou State
Posts: 19
Default Re: Programming alltrax controller

What windows are you running on your computer? You need Windows XP and the Driver for the cable from computer to the controller needs to be installed. ( after connecting did you click refresh?) Go to Altrax website and read up. http://www.alltraxinc.com/Products_ControllerPro.html

Jack
jacksonrh64 is offline   Reply With Quote
Old 12-06-2010, 03:44 PM   #10
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 71,825
Default Re: Programming alltrax controller

I was not able to run my cable on my 64bit system, so I have the old computer set aside for programming.... hope this helps....
scottyb is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Programming Curtis Controller Electric golf carts
Alltrax Programming Question Electric EZGO
Bench programming alltrax Electric EZGO
what is the best programming for an alltrax controller Electric EZGO
Alltrax axe programming Electric EZGO


All times are GMT -5. The time now is 08:40 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.