|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-20-2011, 07:01 PM | #11 |
Not Yet Wild
Join Date: Dec 2011
Location: Nokomis, FL
Posts: 63
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Dave: if I'm reading the wiring diagram right for the GM IGNITION RETRO "HEI".. "FROM THE STICKY" THE BLK WIRE COMING FROM THE VOLT REG. TO THE HEI GOES TO THE C TERM AS WELL AS THE WIRE COMING FROM THE - SIDE OF THE COIL??? RIGHT?? I HAVEN'T FIRED THE MOTOR YET WITH THE NEW HEI IN IT, UNTIL I KNOW I HAVE IT WIRED UP RIGHT...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-20-2011, 08:43 PM | #12 |
Getting Wild
Join Date: Aug 2011
Location: MEMPHIS TN.
Posts: 94
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Don't mean to but in but if you look at it as your replacing the old coil with the new one, the old ignitor is replaced by the hei module and the other two connections go to the pulsar that is located behind the fly wheel. just wire it like you take the old ones out. the wire colors may differ but the physical location for connections is the same. Make sense? Hope it helps,,You'll be pleased with the conversion,,bullit roof !!
|
12-20-2011, 09:15 PM | #13 | |
Not Yet Wild
Join Date: Dec 2011
Location: Nokomis, FL
Posts: 63
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Quote:
|
|
12-20-2011, 09:24 PM | #14 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
The black wire from the regulator is for grounding the metal plate on the HEI. It should connect to one of the two HEI mounting bolts. The black wire does not connect to terminal "C" on HEI. Terminal C on HEI connects to (-) on the coil only. The diagram is not real clear on the grounding.
|
12-20-2011, 09:33 PM | #15 |
Not Yet Wild
Join Date: Dec 2011
Location: Nokomis, FL
Posts: 63
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Thank you!!!!!!!!!!!!!!! I have it connected to the c term right now i'll fix it in the morning....
|
12-21-2011, 09:19 AM | #16 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Ooops sorry I missed this part of the thread. Anyway this is just another demonstration of the power of this forum, so many smart, polite users. It only remains for me to say that I agree with the stuff above. Don't forget to let us know the outcome Walt.
Dave |
12-21-2011, 09:46 AM | #17 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Dave & Walt I know this has been covered before but I'm sorry Walt about the improper installation of the piston. This also proves to other buggie owners though that in fact the engine WILL run when the piston is installed backwards so for other cart owners BEWARE when installing your new top end. PORT GOES ON INTAKE SIDE GREAT to see that you caught it Walt. HOW about the HEI install done yet ?
|
12-26-2011, 10:44 AM | #18 |
Not Yet Wild
Join Date: Dec 2011
Location: Nokomis, FL
Posts: 63
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
WELL THANKS TO ALL ON THIS FORUM, MY CART WORKS GREAT!!!! I DID THE HEI INSTALL "SPARKS EVERY TIME, NICE AND STRONG" I WAS ABLE TO GET ALL MY PARTS OFF E-BAY FOR ABOUT $32.00 W/SHIPPING, AND WHAT DIFF WITH THE PISTON IN THE RIGHT WAY....
|
12-27-2011, 07:40 AM | #19 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 85 gas ezgo takes 20-30 seconds to get WOT
Another FINE REBUILD STORY for all new cart owners to review. Enjoy your cart
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G22 runs 10 seconds | Electric Yamaha | |||
my 88 ezgo takes 5 to 15 seconds before it starts | Gas EZGO | |||
This message will self destruct in 10 seconds | Test Post | |||
91 CC Takes Off In Reverse | Electric Club Car | |||
0 to 50 in 3 seconds | Electric EZGO |