lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-11-2014, 05:42 PM   #1
Rwillden
Not Yet Wild
 
Join Date: Mar 2013
Posts: 31
Default Any luck programming the new RXV Curtis controller via Software

I have the updated Curtis controller for my RXV and it has the freedom unlock. Since the dealers are being rather douche'y about helping out with it, I was wondering if anyone has had luck programming their RXV's with the Curtis 1314-4401 software and a serial cable? I just want to tweak the acceleration and speed if possible.

Thanks in advance.
Rwillden is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-11-2014, 06:08 PM   #2
jontz
Not Yet Wild
 
Join Date: Feb 2014
Posts: 32
Default Re: Any luck programming the new RXV Curtis controller via Software

Some people have had success, most have not. For $30 you can rent the handheld programmer that the dealers use here:

Curtis 1311-4401 Rental

Good Luck!
jontz is offline   Reply With Quote
Old 03-11-2014, 06:54 PM   #3
Rwillden
Not Yet Wild
 
Join Date: Mar 2013
Posts: 31
Default Re: Any luck programming the new RXV Curtis controller via Software

Thanks, I have seen that, but they don't carry the adapter to fit the RXV so I thought I would see if anyone has been successful with the RXV and the software.
Rwillden is offline   Reply With Quote
Old 07-30-2015, 11:36 AM   #4
mnlmason
Not Yet Wild
 
Join Date: Jan 2013
Posts: 1
Default Re: Any luck programming the new RXV Curtis controller via Software

We are going to buy the RXV specific unit #83A21150A for $899, not sure what level programming we will get.
Sold at FSIP -http://www.fsip.biz/ They said the 1314 will not talk to the controller.
They are the Curtis authorized rebuilders.
M
mnlmason is offline   Reply With Quote
Old 07-31-2015, 02:50 PM   #5
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,442
Default Re: Any luck programming the new RXV Curtis controller via Software

To answer the question with pics/proof, yes it can. Gives me no trouble at all.
Attached Images
File Type: jpg 2015-07-31 12.48.32.jpg (172.5 KB, 0 views)
File Type: jpg 2015-07-31 12.48.55.jpg (186.6 KB, 0 views)
File Type: jpg 2015-07-31 12.52.36.jpg (99.8 KB, 0 views)
File Type: jpg 2015-07-31 12.55.40.jpg (150.4 KB, 0 views)
cgtech is offline   Reply With Quote
Old 05-23-2016, 12:12 PM   #6
egoh
Not Yet Wild
E-Z-GO
 
Join Date: Nov 2015
Location: Austin, TX
Posts: 14
Default Re: Any luck programming the new RXV Curtis controller via Software

Sorry to dig up an old post but does the 1311-4401 programmer work fine for the RXV with Curtis controller? I have a 2009 RXV but have a new Curtis Freedom controller in it. Was thinking about renting the programmer in the above link, but wasn't sure if I needed the 1313-4401:

http://www.mrksales.net/shop/item.aspx?itemid=89429

Also is the small round plug they also rent the correct one for this controller?


Many thanks!
Attached Images
File Type: jpg smallround-Curtis.jpg (113.2 KB, 0 views)
egoh is offline   Reply With Quote
Old 05-23-2016, 02:45 PM   #7
mjroman20
Gone Wild
 
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
Default Re: Any luck programming the new RXV Curtis controller via Software

FSIP does also sell adapters for the standard 4 pin Molex connector to RXV to make the existing handsets work.

1314 does indeed communicate with the 1206AC. But does not work with the 123X series controls, which require a newer version of 1314 and serial adapter.
mjroman20 is offline   Reply With Quote
Old 01-26-2017, 01:29 AM   #8
kmbtjm1
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2016
Location: Summerville, SC
Posts: 11
Default Re: Any luck programming the new RXV Curtis controller via Software

What is the Adapter cable number for a 2013 RXV? Any luck programming with the software?
kmbtjm1 is offline   Reply With Quote
Old 01-26-2017, 06:20 AM   #9
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: Any luck programming the new RXV Curtis controller via Software

Quote:
Originally Posted by kmbtjm1 View Post
What is the Adapter cable number for a 2013 RXV? Any luck programming with the software?
I build my own Curtis to E-Z-GO adapters, here is the post.

http://www.buggiesgonewild.com/elect...ml#post1319141

I also make my own programmer cables.

http://www.buggiesgonewild.com/elect...ml#post1318414

You may want to read the whole thread to get an education on programming Curtis controllers.

Bob
BobBoyce is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Programming Curtis Controller Electric golf carts
Programming a Curtis controller Electric golf carts
curtis controller software 2006 preceent Electric Club Car
Curtis Controller Programming Dongle Golf Carts and Parts
programming curtis ac controller Electric Club Car


All times are GMT -5. The time now is 05:03 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.