|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-26-2014, 08:20 AM | #1 |
Not Yet Wild
Join Date: Mar 2013
Location: Michigan
Posts: 7
|
How to test a MCOR II with a meter
I have a 2009 48v Precendent, at the end of last year the cart would die, like someone stepped on the brakes when floored. If I let off the pedal it would go and stop abruptly, now it wont move. when I switch it to reverse the buzzer sounds but doesnt move. I have 49.5 volts. When I press on the gas pedal I hear a click at the pedal but I dont hear the solinoid pull in. There are 5 wires coming out of the MCOR II which ones do I test and what resistent should I have? I have 0 volts across the solinoid, 48.2 volts to ground on one side and 49.2 volts to the other side. I searched for a wiring diagram and trouble shooting steps for this cart but only found stuff for different carts, any help would be helpful, Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Test the MCOR reading at the Controller | Electric Club Car | |||
Difference between MCOR 1 and MCOR 2 | Electric Club Car | |||
MCOR test findings ?? | Electric Club Car | |||
How can I test to see if I need new MCOR? | Electric Club Car | |||
How to test MCOR on 04 IQ regen cart | Electric Club Car |