|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-01-2022, 08:48 PM | #1 |
Not Yet Wild
Join Date: Aug 2021
Posts: 3
|
2008 Yamaha G29 48 volt won’t move unless accelerator is pumped
Hi everyone, I have a 2008 Yamaha g29 48 volt. The cart will not move when I initially press the accelerator. I have to push a few times before it will move. The weird thing is it only does that if it’s been sitting for over 5 minutes. If I am driving the cart around and stop for a minute it will work just fine without having to pump the accelerator. I replaced the stop switch, throttle position sensor and ignition switch. Any ideas? Thank you
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 Yamaha Solenoid clicks but doesn’t move. | Electric Yamaha | |||
2008 Yamaha ydra clicks but won’t move | Electric Yamaha | |||
2008 yamaha 48 volt electric | Electric Yamaha | |||
yamaha g2 36 volt will not move | Electric Yamaha | |||
2008 Yamaha 48 Volt Ydre | Lifted Golf Carts |