|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
03-24-2021, 02:45 AM | #1531 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-24-2021, 09:22 PM | #1532 |
Not Yet Wild
Join Date: Mar 2016
Posts: 12
|
Re: Programming Curtis Controller
Figured it out. The adapter was jacked, nothing software related!
|
03-25-2021, 01:25 AM | #1533 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
Keep in mind, the EEPROM in the "1309 interface" can be overwritten via a remote connection, if and when it "checks in" online. It should NEVER be allowed to "check in". That is rule #1 for anyone working their own solution. Disable all ability for the computer running the software from being able to access the internet! Do not allow it to check for software updates! |
|
04-21-2021, 05:31 PM | #1534 |
Not Yet Wild
Join Date: Oct 2018
Location: Augusta, GA
Posts: 14
|
Re: Programming Curtis Controller
I’ve been lurking on these forums for a while but have been hesitant to post a question because I do not own a golf cart. However, I do have an electric go kart with and AC15 motor and 1238E controller. I’m getting a persistent error code #12 which indicates overcurrent. The problem is, I get the error code just by switching on the ignition. There’s literally no current. I made a 60-second video to demonstrate the problem. I have tried everything in the Curtis Controller manual regarding this particular error code. Thanks for any feedback or ideas you guys can offer. This forum is awesome. Here is the link......
https://www.youtube.com/watch?v=WXkkUAYLvFM |
06-03-2021, 11:54 AM | #1535 | |
Getting Wild
Join Date: Nov 2018
Posts: 92
|
Re: Programming Curtis Controller
Quote:
|
|
06-06-2021, 07:20 PM | #1536 | |
Not Yet Wild
Join Date: May 2021
Posts: 4
|
Re: Programming Curtis Controller
Quote:
Odd question section: Is the procedure for fixing a 1309 that has been overwritten any different from the procedure to make a new cable? Is there any overwrite problem with the computer I was using or is the problem just in the cable? |
|
06-07-2021, 07:53 AM | #1537 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
|
|
06-07-2021, 07:56 AM | #1538 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
I'm glad for you that you find the science amusing. Since that was written. dozens of other scientists have come forward, only to be silenced by the mainstream...
The general concensus of the experts is, 36 to 48 months of life left from the time of vaccination. For those lucky enough to make it that far. The damage to the cells of the body is just too widespread. |
06-07-2021, 08:15 AM | #1539 | |
Not Yet Wild
Join Date: May 2021
Posts: 4
|
Re: Programming Curtis Controller
Quote:
|
|
06-07-2021, 09:53 AM | #1540 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
They probably updated the 1236SE to require a dual mode interface (Logic Level inverted serial/CANbus) like the new 1309 interface. A hacked interface will not communicate with a newer or updated 1236SE...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
wanted curtis pmc controller | Golf Carts and Parts | |||
troubleshooting curtis controller | Electric EZGO | |||
wanted: curtis pmc controller | Golf Carts and Parts |